Best AI Product Design Prompts.
Generate a photorealistic image of a rectangular perfume bottle branded ORREN "BERRY BLAST", with rounded vertical corners, a thick rounded glass base, and a large glossy black domed cap, floating and tilted slightly clockwise amid a cluster of blueberries, raspberries, and a blackberry with a magenta liquid splash and droplets, in a 4:5 vertical portrait composition, straight-on view with a slight low-angle perspective of approximately 0–5° upward, cap fully seated and closed. Material and finish: bottle body is transparent smoky purple/magenta glass with strongly radiused corners (approximately 8–12mm radius) and a thick refractive base, reflectivity 9/10; internal liquid is deep berry-purple with magenta highlights, glossy and dense, reflectivity 8/10; cap is a glossy black domed half-cylinder/capsule shape, reflectivity 9/10; neck collar is dark metallic black-purple with a polished finish, reflectivity 8/10; front label text is printed white, low reflectivity 2/10; blueberries are dark blue-violet with a powdery matte skin, reflectivity 3/10; raspberries are saturated red-magenta with a bumpy drupelet texture, reflectivity 4/10; the blackberry is near-black purple with glossy highlights, reflectivity 5/10; the liquid splash and droplets are transparent magenta-purple, reflectivity 9/10. Color: bottle glass and liquid are truly smoky violet-purple and deep berry-purple respectively; magenta ambient lighting adds glow and highlights only, without turning the bottle flat neon pink. Branding: bold uppercase sans-serif wordmark "ORREN" centered on the lower front curved glass face at approximately 62–68% down from the top of the bottle body, spanning roughly 42–48% of body width; "BERRY BLAST" directly below in a smaller uppercase sans-serif with wider letter spacing, spanning roughly 32–38% of body width, both in white, following the bottle's tilt. Hardware: large glossy black dome cap fully seated and closed over a short polished dark collar/ring stack; no spray nozzle visible, no buttons, hinges, or ports. Background: no physical tabletop — the bottle appears floating in a stylized scene, dark purple-to-magenta gradient backdrop with soft blur and faint berry-leaf silhouettes in the upper-left, three depth layers (foreground floating droplets and berries, midground bottle with berry cluster and liquid splash, background dark leaves on the left and magenta gradient glow on the right), berry cluster crossing diagonally through the front of the bottle from lower-left to upper-right, minimal physical contact shadow with mostly internal CGI-style object and depth shadows. Lighting: key light from approximately 2 o'clock at cool-neutral studio white 5200–5600K producing a bright vertical highlight on the cap and right side of the glass, strong magenta-purple ambient fill from the front-left and background at approximately 4200–4700K and 35–45% of key intensity, strong dark shadow transition on the cap's left side and bottle edges, pink-purple rim highlights along the bottle edges and base, softbox-like white reflections and purple studio environment reflections on the cap and glass, moderate depth of field with the bottle, berries, and splash sharp while background leaves are softly blurred, shot with a 70–100mm product-lens compression. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text, no watermark. Sharp detail throughout the focal plane, natural material texture.
Use the uploaded image as the main visual reference. Do not invent a new product shape, material, branding, camera angle, background, or lighting style — follow the uploaded product image closely and recreate it as a high-end cosmetics advertising hero shot. Generate a photorealistic image of a black-and-gold luxury face cream jar placed among irregular charcoal-black volcanic rocks in a vertical 2:3 composition. The jar is the main center subject, positioned slightly above the vertical midpoint, sitting diagonally across the frame with its left/west side slightly lower and its right/east side slightly higher, creating a subtle tilted hero angle. The camera is close to the product at a low macro product-photography angle, looking slightly upward and forward at the jar label. The lid is closed. Material and finish: the jar body is a short cylindrical cosmetic cream container with a smooth satin-matte black label wrap, rounded cylindrical edges, a slightly recessed lower base rim, and a metallic champagne-gold screw cap with a smooth reflective finish. The cap has soft curved highlights along the upper rim and a brighter vertical highlight on the right side. The black label has a low-reflective satin surface with very fine dust-like speckles visible under the studio light. The jar base has a darker glossy black lower ring with subtle curved reflections. Color: the jar body is deep black with very low saturation and low brightness, shifted slightly warm by golden bounce light. The cap is warm champagne gold with medium saturation and high brightness on highlight areas, darker amber-gold on the shadow side. The charcoal rocks are black and dark graphite with low saturation, rough grey-white mineral edges, and warm orange-gold reflections where the light hits them. The background is a golden brown blurred gradient, medium saturation, with warm amber brightness behind the product. Branding: the front label has a large centered white capital “B” printed on the black surface, sharp and clean. Beneath it is small gold brand text reading “BINYOM,” followed by smaller white text reading “OCDEARS CREAM,” with tiny decorative dot lines around the text. On the west/left side of the label there is a small thin gold line drawing of a house-shaped logo inside a square-like mark. Keep the branding placement, scale, spacing, and alignment exactly like the uploaded image; no distorted letters, no invented logo, no extra text. Hardware: no pump, no nozzle, no transparent glass, no open lid, no cream visible. Only a closed cosmetic jar with a metallic gold cap and wrapped black label. Background: the product rests in a rugged bed of charcoal rocks. On the west/left foreground, a large sharp charcoal rock rises from the lower-left corner, rough and jagged, partially framing the jar. On the east/right foreground, several dark jagged rocks sit close to the camera, forming a rough border around the lower-right and mid-right edge. Directly below the jar, smaller charcoal pieces are sharply visible and catch warm golden light, creating a glowing ember-like effect without flames. Behind the jar on the west/left rear, a tall charcoal rock is heavily blurred, positioned near the upper-left edge. Behind the jar on the east/right rear, a taller blurred charcoal rock mass rises behind the cap, with strong depth blur showing it is far from the focal plane. The far background is a smooth warm golden-brown studio blur with no visible room, no horizon line, and no extra props. Lighting: warm key light from the east/front-right side at approximately 2 o’clock, low-to-medium angle, creating bright gold reflections on the right side of the cap, the jar rim, and the right-facing rock edges. A weaker warm bounce light comes from below the jar, creating a soft golden glow between the charcoal pieces and under the product base. The west/left side of the jar remains darker but still readable. Soft rim highlights appear on the top cap edge and selected rock edges. Shadows are deep, soft-edged contact shadows under the jar and between rocks. Background blur is strong, with the jar label and nearby rocks in focus, rear rocks heavily out of focus, and extreme foreground rocks slightly softer from shallow depth of field. Use a macro lens look around 70–100mm, wide aperture around f/2.8–f/4, with focus locked on the jar label and front rim. Render at maximum photorealistic quality, matching the uploaded image’s exact product geometry, diagonal placement, material finish, color palette, label layout, rock arrangement, golden blurred background, warm studio lighting, shallow depth of field, and premium advertising framing. No CGI look, no plastic-render look, no warped jar, no melted cap, no logo distortion, no added props, no flames, no smoke, no watermark, no extra typography outside the product label.
Hyper-realistic social media poster of a layered chocolate mousse dessert in glass, topped with berries and mint. Floating cocoa powder and berry slices in motion, soft cinematic lighting highlighting textures and reflections. Background: blurred cafe table or gradient abstract for editorial feel. Text: Heading using Playfair Display + Open Sans for luxury & readability ('Decadent Delight'), body text with Lato. Include promotional badge for limited offer. High-resolution, hyper-realistic, commercial-ready Instagram post
Macro close-up commercial food photography of five sushi roll pieces stacked vertically, leaning diagonally from upper-left to lower-right, floating suspended in mid-air with no plate or surface beneath them. Portrait 9:16 aspect ratio. Framing lock: The entire sushi stack must be fully contained within the frame with a small safe margin on all sides — nothing touching or crossing the top, bottom, left, or right edges. Do not crop, cut off, or let any part of the sushi extend beyond the canvas boundary. Center the stack with balanced negative space around it, sized slightly smaller within the frame than a full bleed composition. All flying sesame seeds must also stay fully inside the visible frame — none exiting or touching the edges. From top to bottom: a sushi piece with white rice exterior densely coated in toasted white and black sesame seeds; a piece topped with glossy seared orange salmon with dark caramelized grill marks; a piece with a dark reddish-brown charred glazed topping and sesame along its edge; a piece coated in a dry granular green herb/seaweed crumb; a piece with a glossy red topping showing fine granular texture and bright specular highlights. Cross-sections show rice, a dark seaweed layer, and cucumber/avocado-like green filling inside. Dozens of white and black sesame seeds frozen mid-air around the stack, concentrated on the left side but fully within frame, suggesting frozen motion. Hard directional key light from the upper-left, warm rim light from the back-right separating the food from a dark black-to-deep-red blurred background with a warm glow. Deep dramatic shadows, low fill light. Shallow depth of field, sushi stack in crisp sharp focus, background and distant sesame seeds softly blurred. High-contrast, glossy, cinematic commercial food photography retouching, premium editorial advertising mood. No props, no cutlery, no napkin, no liquid, no condensation, no steam. Composition note: full subject visible, no edge-cropping, comfortable margin on all four sides.
Ultra-realistic cinematic commercial poster design for a premium orange juice brand, vibrant orange juice bottle placed perfectly in the center composition, glossy realistic bottle with fresh condensation water droplets, two half-cut oranges partially hidden diagonally beside the bottle, one orange positioned upper left side and the second orange positioned lower right side creating dynamic asymmetrical balance, energetic orange motion blur effects flowing around the composition, fresh orange leaves scattered softly around all corners of the poster, soft orange atmospheric blur on the left side background, luxury beverage advertising aesthetic, stylish special offer badge attached near the upper right edge of the bottle inspired by modern mango drink advertisements, dramatic curved water splash flowing from the special offer badge toward the lower left side in smooth motion, realistic liquid dynamics and splash physics, premium citrus freshness feeling, cinematic studio lighting with glossy reflections, vibrant natural orange tones, subtle depth of field, clean modern commercial background, realistic fruit textures, high-end beverage campaign style, elegant italic handwritten typography at the top saying “Freshly Squeezed”, below it bold clean modern font saying “Fresh Juice”, premium advertising layout, professional poster composition, realistic shadow behavior, ultra-detailed commercial photography, Canon EOS R5, 85mm lens, cinematic product lighting, Kodak Portra inspired color grading, luxury juice advertisement aesthetic
Generate a photorealistic image of a green glass dropper bottle branded FALOETT, a rounded-rectangle cosmetic serum bottle with a thick refractive glass base, gold screw collar, and black rubber dropper bulb, resting on a glossy dark green marble platform beneath a horizontal orchid branch, in a 4:5 vertical portrait composition, straight-on view with a slight downward camera angle of approximately 5–8 degrees, dropper cap fully seated and closed. Material and finish: bottle body is deep emerald green transparent glass with heavily radiused corners (approximately 8–12mm radius) and a thick refractive base, reflectivity 9/10; internal liquid is dark green, dense and glossy, reflectivity 7/10; a transparent glass pipette tube is faintly visible inside the neck, reflectivity 6/10; collar is polished metallic gold, warm yellow-gold hue, reflectivity 9/10; dropper bulb is glossy black rounded rubber, reflectivity 8/10; front label text is printed white with low reflectivity 2/10; platform is glossy green marble/stone with dark veining and a wet-looking reflective surface, reflectivity 7/10; orchid petals are cream-yellow with pink centers and brown speckling in a soft satin/matte texture, reflectivity 3/10; branches and buds are brown-green woody stems with olive-green buds in a satin texture, reflectivity 3/10. Color: bottle and liquid are a saturated deep emerald green (low-to-medium brightness, high saturation); gold collar and black bulb remain their true warm-gold and true black despite green ambient tint, which adds botanical bounce light only. Branding: white uppercase sans-serif wordmark "FALOETT" centered on the curved front glass face, positioned about 40–45% down from the top of the bottle body and spanning roughly 32–36% of body width; two tiny unreadable white microtext lines directly below as decorative product text only, not legible claims. Hardware: black rounded rubber dropper bulb seated on a polished gold screw collar with a glass pipette descending into the bottle, cap fully closed; no spray nozzle, pump, buttons, hinges, or ports. Background: glossy green marble platform with dark veining directly beneath the bottle, soft dark green studio backdrop with blurred dappled botanical light-shadow patterns, three depth layers (foreground reflective platform edge with small petals/buds, midground bottle with marble block and crossing orchid stem, background soft-focus green wall with leafy shadow patterns), main orchid branch running horizontally above the bottle with a large orchid cluster upper-right and one orchid partially cropped lower-right, soft contact shadow directly under the bottle with a subtle cast shadow across the glossy surface. Lighting: key light from approximately 10 o'clock angled downward at warm-neutral 5200–5600K producing a vertical white highlight on the left side of the bottle, bright gold reflections on the collar, and a glossy highlight on the black bulb; green-tinted ambient fill at approximately 4300–4800K and 45–55% of key intensity; subtle rim highlights along the bottle shoulders and right glass edge; softbox-shaped white reflections and green studio surface reflections visible on the glass; moderate depth of field with the bottle and nearby orchids sharp and the background softly blurred, shot with a 70–100mm product-lens compression. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text, no watermark. Sharp detail throughout the focal plane, natural material texture.
Create a crisp, clean infographic storyboard poster for THE PIZZA MAKER. Wide 16:9 layout, white background, black borders, bold black typography, premium Pixar 3D stylized rendering, vibrant warm Italian pizzeria colors — rich tomato reds, melted cheese golds, toasted crust browns, basil greens, warm oven glow. Top header: THE PIZZA MAKER TOTAL VIDEO TIME: 15 SECONDS 8 SHOTS · FAST · HOT · SATISFYING Legend icons: ACTION, HEAT, TIME HINT, INGREDIENT Same Pixar-style pizza chef throughout: energetic young chef wearing black apron and white tee inside a cozy artisan pizzeria, glowing brick oven, flour particles in the air, warm cinematic restaurant lighting. 8 panels: 1. Pizzeria opens — chef flips sign to OPEN, warm sunlight and oven glow fill the restaurant 2. Dough slap — pizza dough tossed onto floured counter, dramatic flour burst in the air 3. Stretching the dough — chef spinning dough confidently, cinematic motion blur 4. Sauce spread — rich tomato sauce swirled evenly across dough, satisfying overhead close-up 5. Cheese rain — mozzarella falling generously onto pizza, stretchy cheese textures 6. Into the oven — pizza sliding into glowing brick oven, flames flickering dramatically 7. Fresh out the oven — bubbling melted cheese, crispy crust, steam rising beautifully 8. First bite reaction — customer takes a bite, eyes light up with happiness while chef smiles proudly nearby Footer: VIDEO FLOW: 8 shots × ~1.5s = 15 seconds. Dough to first bite. CAMERA TIPS: slow-motion flour burst on dough slap, overhead for sauce spread, macro close-up on bubbling cheese, wide on oven shot, tight emotional shot for first bite reaction LIGHT & STYLE: warm oven glow, rich tomato reds, golden cheese highlights, toasted crust browns, shallow depth of field, Pixar vivid colors PIZZA MAKER NOTES: one chef, one fresh pizza, one unforgettable first bite. Hot, energetic, deeply satisfying. Video Prompt: “Use the attached THE PIZZA MAKER storyboard image as the exact reference. Create a 12-second 16:9 animated artisan pizza-making sequence that follows the 8-shot storyboard exactly. Preserve the same Pixar-style young pizza chef, black apron, cozy artisan pizzeria, glowing brick oven, and warm cinematic aesthetic throughout. Rules: • Follow the sequence exactly from 1 to 8 • One shot per panel, approximately 1.5 seconds each • No skipped steps, no extra ingredients beyond the storyboard • Maintain chef and restaurant continuity throughout • Emphasize flour particles, sauce spreading texture, melting cheese, oven flames, bubbling crust, and emotional first bite reaction Shot sequence: 1. Chef flips OPEN sign — warm sunlight and oven glow flood the pizzeria 2. Pizza dough slapped onto floured counter — dramatic flour burst in slow motion 3. Dough stretched and spun confidently by chef — cinematic motion blur 4. Rich tomato sauce spread evenly across dough — satisfying overhead close-up 5. Mozzarella cheese raining onto pizza — stretchy detailed cheese textures 6. Pizza slides into glowing brick oven — dramatic flames flickering 7. Fresh pizza pulled from oven — bubbling cheese, crispy crust, steam rising beautifully 8. Customer takes first bite — eyes light up with happiness, chef smiling proudly nearby Camera: • Wide shot for pizzeria opening • Slow-motion close-up for dough slap • Overhead angle for sauce spread • Macro close-ups for melting cheese and bubbling crust • Tight emotional close-up for first bite reaction Style: • Warm golden oven lighting throughout • Rich tomato reds, melted cheese golds, toasted crust browns, basil greens • Pixar CGI vivid expressive animation • Shallow depth of field on close-up shots • Smooth satisfying cuts with energetic restaurant atmosphere Goal: A beautiful 12-second artisan pizza journey from dough toss to happy first bite — hot, cinematic, energetic, and deeply satisfying to watch.
Use the uploaded image as the main visual reference, but refine it into a cleaner, more professional, brand-safe sneaker advertising poster. Do not recreate any real brand identity. Keep the overall concept of two floating athletic sneakers, teal studio background, soft smoke trails, and bold ad-poster styling, while improving realism, typography, layout clarity, and product presentation. Generate a high-end commercial poster of two modern white athletic sneakers with bold black curved side panels, shown floating in a studio scene in a vertical 4:5 composition. The lower sneaker is the primary hero object, larger and closer to the viewer, positioned in the lower half of the frame and angled diagonally from the lower-left/west side toward the lower-right/south-east side. Its heel sits more toward the west/left, while its toe extends slightly downward and toward the south-right corner, creating a forward dynamic motion. The upper sneaker is placed above and slightly behind it, crossing diagonally in the opposite direction, with its heel higher on the north-east/right side and its front section pointing more toward the center-left. The upper shoe partially overlaps the lower shoe, with the upper shoe visually sitting behind but still clearly visible. Product geometry and materials: both sneakers are low-top performance lifestyle shoes with a sleek sporty silhouette, rounded toe shape, slightly raised heel collar, pull tab at the back, lace-up closure, breathable mesh side panels, smooth synthetic overlays, and thick cushioned midsoles. The side panel on each shoe is a glossy black curved strip that contrasts with the matte and textured white upper. The upper material combines fine white mesh, smooth white synthetic leather-like panels, white laces, and a sculpted white sole with subtle tread texture. Keep the sneakers clean, premium, and realistic, with natural stitching, believable lace structure, proper sole geometry, and no distorted anatomy. Color and finish: the shoes are bright white with low saturation and high brightness, while the side strip is deep black with a soft glossy reflection. The background is a clean turquoise-to-teal gradient wall, brighter in the center behind the shoes and darker toward the side edges, with a darker teal vignette on the far west and east sides. The lower part of the scene includes a floor plane in a slightly paler teal-grey tone, separated from the wall by a subtle horizon/meeting line. This makes the set look like a studio wall and floor, not a flat background. The meeting edge between the wall and floor should be softly visible, with mild shadow build-up where the vertical wall and horizontal floor visually meet. Background and environment: use a clean studio advertising setup with a smooth gradient wall backdrop and a separate matte floor surface below. The wall should feel softly lit, with darker shadowed edges on both the left and right sides. The floor beneath the shoes should show soft atmospheric shading and a faint reflection-free matte appearance. Add soft diffused shadows on the ground beneath the floating shoes, including a broad elongated shadow directly below the lower sneaker and a lighter secondary shadow beneath the upper sneaker. The shadows should help anchor the shoes in space without making them look like they are touching the floor. Smoke effects: surround both shoes with elegant semi-transparent white smoke wisps. The smoke should appear to rise and curl upward from beneath the soles, around the heel areas, and along the side edges of the shoes. Around the lower sneaker, smoke should gather near the heel and sole on the west/left underside, then curl upward around the front and side, with some strands wrapping near the midsole and drifting toward the center. Around the upper sneaker, smoke should rise from below the sole and behind the heel, then trail upward toward the north/top area in thin flowing ribbons. Keep the smoke airy and graceful, with layered semi-transparent curls, not heavy fog. The smoke should enhance motion and energy without covering key product details. Lighting: use clean commercial studio lighting. Main key light from the front-right/east side at roughly 2 o’clock, creating bright highlights on the right-facing upper edges, toe surfaces, collar edges, and black side panels. Add soft fill from the front-left to keep the white shoes readable and maintain detail in the mesh and laces. Use subtle rim lighting to separate the shoes from the teal background. The shadows on the floor should be soft, diffused, and slightly blurred, consistent with floating objects in a studio setup. Keep the overall lighting crisp, premium, and ad-ready. Typography and layout: ignore the messy original text styling and replace it with a cleaner, more professional, editable-looking layout. In the upper-left quadrant, place the headline text in a way that can easily be changed later. Use sample text: “WALK WALK” in a bold condensed display font, all caps, dark near-black color, stacked with strong presence. Overlay “Loud” and “Proud” in a contrasting flowing script font in white, with “Loud” crossing the upper headline and “Proud” placed beneath it. Keep the typography stylish but readable, with proper spacing and alignment, and leave enough clean room so a designer could replace the text later. At the bottom-left area, place the word “Sneakers” in a handwritten or signature-style script as a product title, and below it add a short block of small uppercase sans-serif promotional copy. Use the same wording seen in the image as placeholder copy, but render it cleanly and neatly so it feels like editable sample text rather than distorted AI text. Make all text placement balanced and supportive, not overpowering the shoes. Overall style: premium sneaker campaign poster, studio product advertising, energetic but clean, modern sportswear branding aesthetic, highly polished, photorealistic, globally usable, and marketplace-ready. Emphasize realism, typography clarity, balanced composition, and ad-quality finish. Render at maximum photorealistic quality. Preserve the floating two-shoe composition, the teal wall-and-floor studio setup, the smoke motion, and the soft ground shadows. No real brand logos, no trademarked identity, no extra objects, no clutter, no warped shoes, no deformed laces, no messy text, no watermark. Keep the final image clean, premium, and suitable as a reusable commercial prompt example.
Generate a photorealistic image of a men's fragrance bottle for "Acqua di Giò Profondo" by Giorgio Armani, styled as a floating editorial hero shot with an aquatic luxury fragrance composition of water splash, citrus, botanicals, and mineral/amber props, in a portrait 2:3 composition, straight-on camera angle with the bottle centered and slightly right-weighted, rotated clockwise approximately 15–20° with no supporting surface — the product appears fully suspended/floating. Cap fully seated and closed, no spray nozzle visible. Material and finish: bottle body is frosted translucent deep navy-blue glass with a soft internal glow, satin-frosted finish, reflectivity 5.5/10, soft non-mirror reflections; cap is a short wide cylindrical form in satin metallic dark steel-blue/navy with a glossy edge highlight, reflectivity 7/10, flat top rendered as an ellipse due to perspective, cap height approximately 22–25% of bottle body height; collar between bottle and cap is polished silver/chrome metal shown as two stacked rings, reflectivity 8.5/10; branding text is printed white/pale-silver directly on the glass, reflectivity 3/10, mostly flat print with slight sheen. Bottle silhouette is a rectangular vertical form with strongly radiused vertical corners at approximately 8–12 mm radius, width-to-height ratio near 1:1.65 for the visible body, broad flat rectangular front face with soft convex glass edge transitions, a thick and slightly darker glass base, and a flat horizontal shoulder line beneath the collar. Color: bottle true base color is deep marine navy blue, medium saturation, low brightness, with darker shading at the edges and base; cap true color is dark steel-blue/navy, medium saturation, medium-low brightness; collar is polished silver/chrome; branding text is white to pale silver; the surrounding dark blue ambient environment casts a cool tone across the glass but must not shift the bottle's true navy base color toward black. Branding: text is centered on the bottle's front face, positioned in the upper-middle area approximately 30–55% down from the bottle top, covering roughly 55–65% of bottle width and 35–40% of bottle height, printed in elegant serif uppercase white/silver lettering that follows the bottle's diagonal tilt, reading "ACQUA DI" above an oversized dominant "GIÒ", with "GIORGIO ARMANI" in smaller text beneath, and "PROFONDO" in smaller text further down near the lower front face. Hardware: chrome/silver collar ring visible directly below the cap; no pump or spray mechanism visible; no other moving parts or closures present. Background: no tabletop or ground surface — the bottle and all props float against a smooth dark navy-blue gradient backdrop. Immediately behind and above the bottle's shoulder, a dynamic clear water splash erupts upward with a translucent ice cube nestled beside it near the top of the frame, both glossy and reflective (reflectivity 9/10), surrounded by small scattered water droplets and silver metallic pearl-like spheres throughout the upper and mid-right areas of the frame. To the upper-left, bright yellow-green lime slices with visible glossy wet pulp overlap a curling lime peel. Purple lavender sprigs emerge from the left-mid and right-mid areas, interspersed with green cedar/evergreen needle branches and rosemary-like sprigs framing the bottle's sides and back. A rough grey mineral rock/stone sits at bottom-right behind the bottle, with broad mint-like green leaves layered in front of and beside it toward bottom-center-right. Warm orange-gold translucent amber resin droplets of varying sizes rest at the bottom-right corner. A soft light beige fur or wood-fiber textured tuft sits at the bottom-left of the composition. Depth layers: bottle in sharp foreground; lime, herbs, lavender, water splash, and minerals in a sharp midground circular burst arrangement behind and around the bottle; dark blue gradient with softly blurred floating droplets as background. No readable background text, no watermark. Lighting: key light from front-left/top-left at approximately 10–11 o'clock, cool-neutral color temperature around 5200–5800K, producing crisp specular highlights on water, metal, and glass; fill light at roughly 40–50% relative to key, cool blue ambient tone around 4500–5200K; rim light present along the cap edge, the right side of the bottle, water droplets, and citrus edges; strong specular highlights on the chrome collar, cap rim, water splash, droplets, ice cube, and amber resin; minimal hard shadows due to the floating composition, with depth conveyed through darker edge falloff on the bottle rather than ground shadows; cap and collar reflect soft vertical studio highlights and the dark blue surroundings; captured with an estimated 70–100mm commercial product lens compressing the ingredient cluster behind the bottle, moderate depth of field keeping the bottle and main props sharp while the rear water splash falls off slightly softer, focal plane on the bottle's branding and front face; cool aquatic commercial color grade with split toning of cool blue shadows and warm amber highlights, retouching level 9/10. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text beyond those specified, no watermark. Sharp detail throughout the focal plane, natural material texture.
Commercial beverage product photography of a kiwi milkshake in a clear plastic takeaway cup, centered and tilted slightly diagonally from lower-left to upper-right, surrounded by a dramatic milk splash. Portrait 9:16 aspect ratio. Framing lock: The entire cup, straw, and all key splash arcs must be fully contained within the frame with a small safe margin on all sides. Do not let the cup, straw tip, or main splash crowns cross or exit the top, bottom, left, or right edges. Cup occupies approximately 65-70% of frame height, centered with balanced negative space around it for the splash to read clearly within bounds. The tall cylindrical clear plastic cup, slightly tapered at the base, shows distinct layers inside: white creamy milkshake base alternating with thick glossy green kiwi puree containing visible black kiwi seeds, with sauce trailing down the inside of the cup walls. A scoop of pale vanilla ice cream sits near the top-left rim, topped with soft white whipped cream peaks, drizzled generously with glossy green kiwi sauce. Fresh mint sprigs rest on top and tuck around the rim. A clear straw enters diagonally from the upper-right. A circular white label on the front of the cup reads "Sweet Monkey Shake" in elegant black script. A dynamic white milk splash wraps behind and around the cup in crown-like arcs, with smaller green kiwi-puree splash droplets suspended on the right side. Sliced kiwi pieces — including one large half-slice — float around the base and sides of the cup, along with scattered mint leaves. Small condensation droplets sit on the cup's surface. Soft commercial key lighting from the upper-left with subtle rim highlights on the cup edges, straw, splash tips, and kiwi flesh. Moderate fill light keeps shadows soft and readable. Background is a smooth, matte, deep forest-green backdrop with shallow blur, no visible texture or grain. High saturation, especially in the kiwi green and white cream contrast against the dark green background. Crisp sharp focus on the cup, toppings, and foreground kiwi, with distant splash droplets falling slightly softer. Low grain, high-clarity, vivid color-graded commercial beverage retouching style — fresh, energetic, premium dessert-drink advertising mood. Composition note: full cup, straw, and primary splash visible with no edge-cropping; comfortable margin on all four sides.
Generate a photorealistic image of a men's fragrance bottle for "Boss Bottled Night" by Hugo Boss alongside its matching retail box, styled as a dark luxury editorial hero shot with moody smoke and reflective black marble styling, in a tall portrait 9:16 composition, straight-on camera angle with a very slight low angle of approximately 0–5° upward, bottle placed left-center in the foreground and the box placed right-center directly behind it, rotated slightly so its front face and right side face are both visible in a 3/4 perspective. Cap fully seated and closed on the bottle, no spray nozzle visible; box closed and upright with no open flaps. Material and finish: bottle body is dark translucent blue-black high-gloss glass, reflectivity 8.5/10, with strong curved white highlights; cap and neck are glossy black/navy glass or lacquered plastic, reflectivity 7.5–8/10; box is rigid cardboard packaging with a satin/gloss laminated finish, reflectivity 4.5/10, soft sheen with controlled highlights; tabletop is glossy black marble with beige/gold veining, reflectivity high enough to produce a clear mirrored reflection of the bottle base. Bottle silhouette is a rounded rectangular flask-like form with broad rounded shoulders smoothly transitioning into a tall narrow cylindrical neck, body proportion approximately 1:1.55 width-to-height excluding cap, vertical corners highly rounded at approximately 10–16 mm radius, front face gently curved and convex rather than flat, base is thick refractive glass with an electric cobalt-blue glow at the bottom; cap is short and cylindrical with a flat top, slightly wider than the neck, cap height approximately 15–18% of bottle body height. Box is a tall rectangular cuboid with sharp edges and slight bevels, front face flat with a dark glossy/satin surface, right side face nearly black and shown at a 3/4 angle. Color: bottle true base color is near-black navy blue, low brightness, medium saturation, with an electric cobalt-blue glow near the lower base; cap and neck are black-navy; box true color is deep midnight navy blue, low brightness, low-to-medium saturation; a cool blue ambient tint affects shadows and smoke throughout the scene but the product must remain true black-navy, never pure black or generic blue. Branding: bottle front shows large vertical embossed/debossed "BOSS" lettering running from lower-left upward through the center of the curved body, covering approximately 45–55% of bottle height and 35–45% of bottle width, rendered as raised glass emboss with silver-blue reflective highlights, with smaller printed pale-silver "HUGO BOSS" text positioned beside it. Box front face shows large silver-white "BOSS" text centered in the lower-middle area covering approximately 55–65% of box width and 25–35% of box height, with "HUGO BOSS" printed vertically to the right of the large BOSS text, and "BOTTLED NIGHT" printed below in smaller silver-white lettering, plus small additional product-detail text beneath that is present but not fully legible. Hardware: cap fully seated with no visible seams or mechanism; no spray nozzle or pump visible on the bottle; box shows no visible flaps, tape, or functional hardware. Background: a glossy black marble tabletop with beige/gold veining serves as the surface, showing a clear reflection of the bottle base and its cobalt-blue glow. Backdrop is a dark, smoky studio background transitioning from black to deep blue, with thick semi-transparent gray-blue smoke/vapor rising and curling around and behind both the bottle and box, extending upward beyond the top of the frame. In the foreground, cropped at bottom-left, dark charcoal-like chunks rest on the marble surface slightly out of focus; at bottom-right, a brown wood or cinnamon-stick-like prop rests on the marble, also slightly out of focus. Depth layers: soft-focus charcoal and wood props in the near foreground, sharp bottle and box in the midground, softly diffused smoke clouds in the background. Shadows are soft contact shadows beneath the bottle and box, blending into dark cast shadows on the marble. No readable background text, no watermark. Lighting: key light from front-left at approximately 9–10 o'clock, positioned slightly above the product, cool color temperature around 4800–5400K, producing a strong bright oval highlight on the bottle's left shoulder and vertical highlights along the neck and cap; fill light low, approximately 25–35% relative to key; a cool blue rim light/glow traces the bottle's edges, the lower base, the smoke, and the box edges; a distinct blue reflection line is visible on the marble surface; bottle glass reflects soft studio softbox shapes and dark set panels; captured with an estimated 70–100mm product lens to keep the bottle shape controlled while compressing the box and smoke background, moderate depth of field with the bottle and box sharp while foreground props and rear smoke fall off softer, focal plane on the bottle's front branding and the box logo; cool dark commercial color grade with blue-black shadows and muted warm beige marble veining, retouching level 9/10. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text beyond those specified, no watermark. Sharp detail throughout the focal plane, natural material texture.
Generate a photorealistic image of a men's fragrance bottle branded "BOSS," styled as a floating editorial hero shot with a dark masculine luxury fragrance composition of smoke, splintered wood, leather ribbon, and charcoal-like debris, in a portrait 2:3 composition, straight-on camera angle with a very slight low angle of approximately 0–5° upward, bottle centered vertically and horizontally in the foreground with a circular burst of wood, leather, and smoke props radiating behind it. Cap fully seated and closed, no spray nozzle visible. Material and finish: bottle outer body is high-gloss near-black smoky brown/black translucent glass, reflectivity 8.5/10, with a warm cognac amber-brown translucent central panel/core, reflectivity 7.5/10; cap is a tall glossy black lacquered plastic or metal cylinder, reflectivity 7.5/10, deep black with subtle cool gray highlights; branding lettering is embossed/debossed directly into the glossy curved front glass, reflectivity 7/10, defined by highlight and shadow edges rather than flat print color. Bottle silhouette is a rounded rectangular flask-style form, approximately 1:1.75 width-to-height including cap, with strongly radiused vertical corners at approximately 10–16 mm radius, a thick heavy glass base with rounded lower corners and visible glass thickness, smooth rounded shoulders narrowing into a short black cylindrical neck mostly hidden beneath the cap, and a curved glossy front face; cap is tall and cylindrical with a flat top and slightly raised rim, cap height approximately 22–25% of bottle body height, slightly narrower than the shoulders and wider than the neck. Color: bottle outer true color is near-black smoky brown/black, low brightness, low saturation; central panel true color is cognac amber-brown, medium saturation, medium brightness; cap is deep black; the surrounding cool gray ambient light and smoke add blue-gray shadow tones but must not override the product's true black-brown and amber base colors. Branding: a single vertical wordmark reading "BOSS" is embossed/debossed into the glossy front glass, centered slightly right of the bottle's vertical axis, letters stacked upward from lower body to upper body in bold uppercase sans-serif styling, covering approximately 60–70% of bottle body height and 35–45% of bottle body width; no other readable text is present anywhere on the bottle. Hardware: cap fully seated with no visible seams; no spray nozzle, pump, or box present. Background: no tabletop or ground surface — the bottle floats against a dark charcoal-to-black gradient studio backdrop. A dark brown pebbled leather strip with a satin sheen curves in a wide arc behind and around the bottle, crossing from upper-left down toward lower-right. Rough splintered brown wood sticks and fragments radiate outward behind the bottle at various angles, with additional chunky dark wood/charcoal-like blocks clustered at lower-left and lower-right. Fine wood chips, dust, and debris particles scatter through the midground. Soft semi-transparent gray-white smoke trails rise and curl around the bottle and through the wood cluster, extending upward and outward toward the frame edges. Depth layers: bottle and crossing smoke sharp in the foreground; leather ribbon, wood pieces, and smoke in a sharp midground circular burst; dark gradient background with softly diffused upper smoke trails. No ground shadow — depth is conveyed through internal glass shading and prop occlusion rather than a cast shadow. No readable background text, no watermark. Lighting: key light from front-left/top-left at approximately 10–11 o'clock, positioned slightly above the product, neutral-cool color temperature around 5000–5600K, producing a bright oval highlight on the upper bottle shoulder and cap; fill light low-to-medium, approximately 30–40% relative to key, cool gray ambient tone around 4500–5000K; rim light traces the bottle edges, smoke, leather strip, and wood fragments; narrow vertical specular highlights run along the cap and side glass; glossy bottle reflects soft studio softbox shapes, dark surrounding studio tones, and warm brown prop colors; captured with an estimated 70–100mm product lens compressing the layered wood and smoke cluster, moderate depth of field with the bottle sharp and rear smoke/debris falling off slightly softer, focal plane on the bottle's front branding and central amber panel; dark warm-woody commercial color grade with cool gray smoke contrast and split toning of cool gray shadows against warm amber/brown highlights, retouching level 9/10. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text beyond those specified, no watermark. Sharp detail throughout the focal plane, natural material texture.
Generate a photorealistic image of a luxury perfume bottle branded LUNARIA PERFUMES, a short rectangular decanter with chamfered corners and a faceted oval-diamond crystal stopper, centered on a circular studio pedestal amid lavender flowers and glossy violet spheres, in a 4:5 portrait composition, straight-on front view with a slight downward camera angle of approximately 5–10 degrees, cap fully seated and closed. Material and finish: bottle body is deep violet translucent faceted glass with sharp beveled edges at approximately 30–45 degree chamfers, reflectivity 9/10; cap is a faceted purple crystal stopper in an oval-diamond silhouette with mirror-like internal reflections, reflectivity 9/10; neck collar is polished metallic gold in stacked rings, reflectivity 8/10; front label artwork is pale lavender-white script, reflectivity 5/10; pedestal is matte lavender-purple satin finish, reflectivity 3/10; flowers are pale lavender and white with a velvety matte texture, reflectivity 2/10; decorative spheres are glossy deep violet with bright white highlights, reflectivity 9/10. Color: bottle glass and internal liquid read as saturated deep violet-purple (low-to-medium brightness, high saturation), with pale lavender ambient light adding lighter purple highlights without shifting the true base color. Branding: centered uppercase serif wordmark "LUNARIA" in pale pink-lavender spanning approximately 58–62% of frame width in the upper third, with two small pale pink heart icons above and right of the final letters; "PERFUMES" in matching uppercase serif directly below at approximately 34–38% of frame width; cursive script "Lunaria" centered on the bottle's front label panel at approximately 22–28% of bottle body width in white/pale lavender; bottom-center stacked uppercase tagline "CELEBRATE FEMININITY AND GRACE" in white/pale lavender. Hardware: decorative faceted crystal stopper shown closed with no visible spray nozzle or pump; polished gold stacked collar rings at the neck; no buttons, hinges, or ports. Background: circular matte lavender pedestal as the immediate surface, purple studio backdrop with a smooth gradient and a strong diagonal lavender spotlight beam from the upper right, a gray marble-textured vertical panel visible on the left, three depth layers (cropped foreground flowers and spheres, midground bottle with flowers and pedestal, background purple wall and marble panel), soft contact shadows beneath the bottle, flowers, and spheres. Lighting: key light from approximately 10–11 o'clock at neutral-white 5200–5600K producing bright specular highlights on the cap and glass edges, ambient/fill lavender-purple tint at approximately 4500–5000K and 60–70% of key intensity, subtle rim highlights on the right edges of the cap and bottle shoulders, softbox-shaped reflections visible on the glass and spheres, deep focus on the bottle and nearby flowers with slight softness in the far background, shot with a 70–100mm product-lens compression. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text, no watermark. Sharp detail throughout the focal plane, natural material texture.
Hyper-realistic social media poster of a premium skincare serum bottle with glass dropper, placed on reflective marble. Include floating flower petals and subtle mist to indicate fragrance and luxury. Soft cinematic lighting highlighting glass, liquid, and label textures. Blurred gradient or high-end spa background. Include text placeholders for brand name, product benefits, and discount badge. Editorial, Instagram-ready, hyper-realistic
Ultra-realistic social media poster of a gourmet double cheeseburger, perfectly stacked with fresh lettuce, tomato, onions, and melted cheese. The burger sits on a reflective tabletop with soft cinematic lighting and realistic textures of bun, meat, and toppings. Include floating ingredients like sesame seeds, tomato slices, and subtle seasoning particles in motion. Vibrant gradient background (orange-red), slight depth-of-field to emphasize the burger. Integrated text placeholders for ‘50% OFF’, brand logo, and call-to-action. High-resolution, hyper-realistic, editorial-style for Instagram or Facebook advertising
Portrait (4:5) premium fast-food commercial advertisement poster, dark moody background with cinematic warm lighting, smoke, and floating glowing embers. Framing lock: The full burger, fries bowl, drink glass, wooden pedestal, all headline text, and footer text must stay entirely within the frame with a small safe margin on all sides. Nothing should be cropped or touch the top, bottom, left, or right edges. Top-left: a circular badge logo with a flame icon above bold text "BBQ" and a script word "Burgers" beneath it, with a thin grill-fork line icon as part of the circular badge border. Top-right: a small cartoon chef mascot character giving two thumbs up, next to script text reading "Free Home Delivery" in orange. Center headline block: layered overlapping typography — a slim white cursive word above and behind bold distressed orange all-caps text, which overlaps the top of a large white script word beneath it, plus a small chef's hat icon graphic near the orange text. Below that, a tilted rough-edged orange brush-stroke banner shape containing bold black serif promotional text. Hero food composition, centered: a large sesame-seed cheeseburger with a glossy golden-brown bun, thick grilled beef patty with mild caramelization, one fully melted cheddar slice with soft folded edges, green leaf lettuce, purple onion rings, tomato slices, and white sauce peeking from beneath the bun — no dripping sauce. To its left, a white ceramic bowl of golden French fries. To its right, a tall clear glass filled with dark cola, ice cubes, visible carbonation bubbles, heavy condensation droplets, and a fictional brand script logo on the glass (not Coca-Cola or any real brand). All three items sit atop a thick rustic tree-trunk slice pedestal with natural bark edge and clean, unmarked wood grain — no watermark, no texture artifacts, no embedded text on the wood surface. Background: dark wooden plank tabletop beneath the pedestal, black seamless smoky backdrop behind, soft drifting backlit smoke, and small floating warm-orange glowing embers scattered across the negative space. Footer, bottom-left: bold white "Contact No:" label with an orange phone number beneath it. Bottom-center: orange handwritten script reading a call-to-action phrase. Bottom-right: white bold "Visit our website" label with an orange URL beneath it. Lighting: key light from the upper-left, front-right fill light, warm rim light outlining the burger's edges, smoke illuminated from behind, bright highlights on the bun and glass. Palette: deep black, warm orange, golden yellow, white, rich brown — medium-high saturation, warm highlights, dark shadows. Entire meal in crisp sharp focus, background softly blurred. Low grain, high-end commercial food compositing and retouching, premium/cinematic/smoky restaurant advertising mood. Composition note: full meal, pedestal, all headline and footer text fully visible with no edge-cropping; comfortable margin on all four sides. No real-world trademarked brand names or logos (e.g. Coca-Cola) — use fictional or generic branding only.
Luxury commercial product photography of a matte black premium tea box on the left and a filled glass of red tea on the right, with a scattered pile of loose dry tea leaves connecting them across the bottom foreground. Portrait 9:16 aspect ratio, shot on a glossy black mirror-like reflective tabletop against a dark charcoal-to-black vertical studio gradient background. Framing lock: The full box, the full glass including rim and base, and the rising steam must all stay fully within the frame with a small safe margin on all sides. Do not let the steam, box top, or glass rim touch or cross the top edge; do not crop the base of either object at the bottom. Box and glass together occupy roughly 75% of frame height, centered as a pair with balanced negative space above for the steam to read clearly. The tea box is rectangular, matte black with gold foil accents: a centered gold shield-and-star emblem near the top, a bold gold wordmark below it, and a smaller gold subtitle line beneath that. An angular, pointed diamond-shaped cutout window in the lower-front panel reveals loose curled dark tea leaves with golden tips inside. Small fine-print text sits in a vertical block on the upper-left face of the box, and a short line of net-weight text sits near the bottom — render all box and glass text as elegant but abstract/illegible gold lettering rather than attempting real words, to avoid garbled text artifacts. The tea glass is a traditional Turkish tulip-shaped glass — narrow waist, flared rim, flared base, thick clear glass walls — filled nearly to the rim with deep ruby-red tea, glowing brighter near the thinner curved edges of the glass from light refraction. The same gold shield emblem and a matching gold wordmark appear centered on the front of the glass. Thin wisps of translucent grey steam rise from the tea's surface, curling and drifting toward the upper-right, softly backlit against the dark background. A mound of long, twisted, wiry dark tea leaves with golden-brown tips sits in the foreground between the box and the glass, with a few loose strands visible through the box's window. The glossy black tabletop below produces a soft mirrored reflection of both the box and the glass, including a faint red glow and gold highlight in the reflection. Soft studio key light from the front-right with subtle rim lighting outlining the glass rim, tea's edge, box edge, and steam. Shadows stay dark and controlled but details remain readable. Dominant palette: matte black, charcoal grey, metallic gold, ruby red, dark brown and golden tea leaf tones — moderate overall saturation with high saturation concentrated in the red tea. Crisp sharp focus on the box, glass, and foreground leaves, with the background falling into soft blur. Low grain, high-clarity, high-contrast glossy commercial retouching — premium, elegant, warm luxury tea advertisement mood. Composition note: full box, full glass, and steam plume entirely visible with no edge-cropping; comfortable margin on all four sides.
Square (1:1) commercial sneaker advertisement poster, dark black-to-charcoal gradient background, studio product-shot style with strong contrast. Framing lock: Full hero sneaker, all headline text, and both callout/feature labels must stay fully inside the frame with a small safe margin on all sides. Nothing — text, shoe, or callout lines — should be cut off at any edge. Bold oversized white condensed uppercase headline "SNEAKERS" in the upper-left, with a smaller thin letter-spaced line "PREMIUM CASUAL" directly above it. In the upper-right, inside a thin white bracket-style frame, size text "Sizes 36–41" in bold with "ALL COLORS AVAILABLE" beneath it in smaller letter-spaced type. A chunky casual athletic sneaker as the hero product, angled low three-quarter view, centered slightly right and filling the lower half of the frame: white mesh toe box with open-weave texture, smooth white and grey synthetic overlay panels, orange elastic laces threaded through black lace loops, an orange padded heel tab, a black mesh-textured inner collar, and a thick sculpted white midsole with bold orange side panels and black oval tread inserts on the outsole. A soft grounding shadow beneath the shoe on a smoky grey studio floor. A second identical sneaker sits blurred in the upper-left background, angled more steeply as if mid-stride, motion-blurred to suggest dynamic forward movement, out of focus behind the sharp hero shoe. Three thin white line-and-circle callouts point from small hollow circle markers on the shoe to feature labels: one near the laces reading "Elastic laces," one on the side panel reading "Genuine leather," and one near the sole reading "Anatomical insole" — each in small clean white sans-serif type. Small white four-point sparkle icons scattered asymmetrically in the negative space, one lower-left and one near the sole area. At the bottom-left, three pill-shaped tags in a row: "COMFORT" and "TRENDY" as white outlined ghost buttons, "STYLE" as a solid filled orange pill — creating a clear visual hierarchy. At the bottom-center, small social media icons with "FOLLOW US" text beside them. At the bottom-right, leave a small clean empty rectangular space reserved for a brand logo, with a short italicized placeholder tagline beneath it in small white text. Soft key light from the front-left with strong clean highlights on the white toe box, side panels, sole edges, and orange lace/heel details. Subtle rim light separating the shoe from the black background. Dominant palette: white, orange, black, and charcoal grey with high contrast between the white/orange product and dark background. Sharp, crisp focus on the hero shoe; heavy blur on the background shoe. Low grain, high-clarity, high-contrast commercial product retouching, sporty premium retail advertisement mood. Composition note: hero shoe, full headline, size block, and both callouts entirely visible with no edge-cropping; comfortable margin on all sides. If you want the actual Puma name/logo in the final asset, that part you'd need to add yourself afterward (e.g., in an image editor) rather than through the generation prompt.