Use the uploaded image as the main visual reference. Recreate the same subject, same solid-black studio setting, same near-black outfit, same framing, and same atmosphere. Do not invent a new face, new outfit, new background, or new camera angle. Follow the uploaded image closely.

Generate a photorealistic black-and-white image of a woman aged mid-20s to mid-30s in a 9:16 vertical portrait composition. The face is nearly centered in frame, with a subtle three-quarter turn toward frame-left and chin held at a neutral-to-very-slightly-raised angle. The crop begins at the crown of the head — dark hair approaches or touches the top and side frame edges — and ends just below the base of the neck, with only a faint suggestion of a near-black upper garment visible at the very lower edge. Keep everything close to the original uploaded image.

Preserve the same facial identity: oval face shape with a tapered lower third, high and prominent cheekbones accentuated by hard directional light, a defined but non-angular jawline, a narrow softly rounded chin, a narrow straight nose with medium-to-high bridge height and compact nostril width, a short-to-medium philtrum, and almond-shaped subtly upturned eyes set approximately one eye-width apart. Render full-coverage foundation, smoky tonal eyeshadow over the upper lids, dark upper-lash tightlining with no graphic wing, dense elongated cosmetically enhanced lashes, sculpted and filled thick softly angled brows sitting close to the eye line, subtle cheek contouring visible through luminosity sculpting, and closed satin nude-value lips with a defined cupid's bow and a fuller lower lip than upper — lip corners level, orbicularis oris fully relaxed, zero smile-muscle activation, mentalis relaxed with no chin pucker, frontalis neutral with no forehead raise, corrugator at near-neutral with a subtle set that reads as intensity rather than tension. Skin retouching at 6/10: moderate smoothing across the forehead, under-eye area, and central cheek, with visible pores and micro-texture preserved on the illuminated cheek surface, nose wing area, and upper lip zone — hard raking light should reveal forehead skin texture and fine surface detail. No plastic skin. No flat beauty-filter smoothing.

Render the eye state and gaze exactly as in the uploaded image: both eyes open, gaze directed slightly upward and toward frame-right rather than into the lens — averted but visually locked and intense, not unfocused or wandering. The frame-right eye (subject's left eye) is fully illuminated and sharply resolved, with one small roughly circular catchlight positioned in the upper-right quadrant of the iris. The frame-left eye (subject's right eye) is engulfed in deep shadow and barely discernible as a form — do not illuminate it, do not introduce a catchlight into it, do not default to open symmetrical eyes facing camera.

Hair is near-black in luminosity value, long, loose, and softly wavy with medium-width clump strands falling with gravity. Parting is slightly off-center. Volume is full on both sides of the face with heavier dark wavy masses falling alongside the jaw on frame-right. Individual flyaway strands cross the forehead and lit upper cheek diagonally. Surface finish is glossy with a long bright linear specular streak visible along the frame-right hair fall. No tight curls. No dry matte fiber texture.

A near-black smooth fitted garment is faintly visible at the very base of the neck in the lower shadow region only — no neckline geometry is resolvable, no logos, no patterns, no separate neckwear. The garment merges into the background black.

Background is a solid pure-black studio field — zero depth, zero objects, zero people, zero bokeh, zero environmental elements. Rain, fog, water droplets, and particles are all absent. Background luminosity is crushed to near-zero, making the lit facial plane the sole luminous element in the frame.

Single hard light source at 1–2 o'clock position — camera-right, slightly elevated, slightly front-angled — producing a sharp diagonal shadow terminator that originates at the upper-right forehead and cuts diagonally downward across the nose bridge, through the upper cheek, continuing toward the lower-left jaw. Lit zone covers: frame-right forehead, the illuminated brow, the subject's left eye and upper lid, the nose bridge with a tight bright specular on its upper plane, the upper cheekbone with a broad specular highlight, the lit lip surface, and a narrow chin strip. Fill level is approximately 5–8% — shadow side retains the faintest structural information before dropping to pure black. No rim light. No second source. No bounce color cast. Modifier: bare strobe or small undiffused Fresnel producing hard-edged shadow boundaries with minimal penumbra. Skin speculars appear as small bright points on the nose bridge, upper cheekbone, center of the illuminated eyelid, and center of the lower lip.

Render as a high-contrast black-and-white photograph. Blacks fully crushed in shadow regions and background. Highlights bright but non-clipping on nose bridge and cheekbone specular points. Local contrast pushed to reveal skin micro-texture and forehead surface under hard raking light. Grain at 2/10. Post-processing: high-contrast editorial black-and-white with deep shadow crush, selective luminous highlight zones, and moderate beauty-level skin smoothing. Focal length equivalent approximately 85–135mm. Depth of field: full facial plane sharp from front to ear zone; background requires no separation as it is already solid black. Aspect ratio 9:16 vertical.

Render at maximum photorealistic resolution. Sharp facial detail across the entire illuminated zone. Natural pore-level skin texture on all lit surfaces. No CGI look. No anatomical errors. No motion blur. No lens distortion. No watermark. No text. No extra people. No extra objects. Photorealistic only.

Use the uploaded image as the main visual reference. Recreate the same subject, same solid-black studio setting, same near-black outfit, same framing, and same atmosphere. Do not invent a new face, new outfit, new background, or new camera angle. Follow the uploaded image closely.

Generate a photorealistic black-and-white image of a woman aged mid-20s to mid-30s in a 9:16 vertical portrait composition. The face is nearly centered in frame, with a subtle three-quarter turn toward frame-left and chin held at a neutral-to-very-slightly-raised angle. The crop begins at the crown of the head — dark hair approaches or touches the top and side frame edges — and ends just below the base of the neck, with only a faint suggestion of a near-black upper garment visible at the very lower edge. Keep everything close to the original uploaded image.

Preserve the same facial identity: oval face shape with a tapered lower third, high and prominent cheekbones accentuated by hard directional light, a defined but non-angular jawline, a narrow softly rounded chin, a narrow straight nose with medium-to-high bridge height and compact nostril width, a short-to-medium philtrum, and almond-shaped subtly upturned eyes set approximately one eye-width apart. Render full-coverage foundation, smoky tonal eyeshadow over the upper lids, dark upper-lash tightlining with no graphic wing, dense elongated cosmetically enhanced lashes, sculpted and filled thick softly angled brows sitting close to the eye line, subtle cheek contouring visible through luminosity sculpting, and closed satin nude-value lips with a defined cupid's bow and a fuller lower lip than upper — lip corners level, orbicularis oris fully relaxed, zero smile-muscle activation, mentalis relaxed with no chin pucker, frontalis neutral with no forehead raise, corrugator at near-neutral with a subtle set that reads as intensity rather than tension. Skin retouching at 6/10: moderate smoothing across the forehead, under-eye area, and central cheek, with visible pores and micro-texture preserved on the illuminated cheek surface, nose wing area, and upper lip zone — hard raking light should reveal forehead skin texture and fine surface detail. No plastic skin. No flat beauty-filter smoothing.

Render the eye state and gaze exactly as in the uploaded image: both eyes open, gaze directed slightly upward and toward frame-right rather than into the lens — averted but visually locked and intense, not unfocused or wandering. The frame-right eye (subject's left eye) is fully illuminated and sharply resolved, with one small roughly circular catchlight positioned in the upper-right quadrant of the iris. The frame-left eye (subject's right eye) is engulfed in deep shadow and barely discernible as a form — do not illuminate it, do not introduce a catchlight into it, do not default to open symmetrical eyes facing camera.

Hair is near-black in luminosity value, long, loose, and softly wavy with medium-width clump strands falling with gravity. Parting is slightly off-center. Volume is full on both sides of the face with heavier dark wavy masses falling alongside the jaw on frame-right. Individual flyaway strands cross the forehead and lit upper cheek diagonally. Surface finish is glossy with a long bright linear specular streak visible along the frame-right hair fall. No tight curls. No dry matte fiber texture.

A near-black smooth fitted garment is faintly visible at the very base of the neck in the lower shadow region only — no neckline geometry is resolvable, no logos, no patterns, no separate neckwear. The garment merges into the background black.

Background is a solid pure-black studio field — zero depth, zero objects, zero people, zero bokeh, zero environmental elements. Rain, fog, water droplets, and particles are all absent. Background luminosity is crushed to near-zero, making the lit facial plane the sole luminous element in the frame.

Single hard light source at 1–2 o'clock position — camera-right, slightly elevated, slightly front-angled — producing a sharp diagonal shadow terminator that originates at the upper-right forehead and cuts diagonally downward across the nose bridge, through the upper cheek, continuing toward the lower-left jaw. Lit zone covers: frame-right forehead, the illuminated brow, the subject's left eye and upper lid, the nose bridge with a tight bright specular on its upper plane, the upper cheekbone with a broad specular highlight, the lit lip surface, and a narrow chin strip. Fill level is approximately 5–8% — shadow side retains the faintest structural information before dropping to pure black. No rim light. No second source. No bounce color cast. Modifier: bare strobe or small undiffused Fresnel producing hard-edged shadow boundaries with minimal penumbra. Skin speculars appear as small bright points on the nose bridge, upper cheekbone, center of the illuminated eyelid, and center of the lower lip.

Render as a high-contrast black-and-white photograph. Blacks fully crushed in shadow regions and background. Highlights bright but non-clipping on nose bridge and cheekbone specular points. Local contrast pushed to reveal skin micro-texture and forehead surface under hard raking light. Grain at 2/10. Post-processing: high-contrast editorial black-and-white with deep shadow crush, selective luminous highlight zones, and moderate beauty-level skin smoothing. Focal length equivalent approximately 85–135mm. Depth of field: full facial plane sharp from front to ear zone; background requires no separation as it is already solid black. Aspect ratio 9:16 vertical.

Render at maximum photorealistic resolution. Sharp facial detail across the entire illuminated zone. Natural pore-level skin texture on all lit surfaces. No CGI look. No anatomical errors. No motion blur. No lens distortion. No watermark. No text. No extra people. No extra objects. Photorealistic only.