Best AI chocolate-photography Prompts.
Generate a photorealistic image of a rectangular perfume bottle branded ORREN "BERRY BLAST", with rounded vertical corners, a thick rounded glass base, and a large glossy black domed cap, floating and tilted slightly clockwise amid a cluster of blueberries, raspberries, and a blackberry with a magenta liquid splash and droplets, in a 4:5 vertical portrait composition, straight-on view with a slight low-angle perspective of approximately 0–5° upward, cap fully seated and closed. Material and finish: bottle body is transparent smoky purple/magenta glass with strongly radiused corners (approximately 8–12mm radius) and a thick refractive base, reflectivity 9/10; internal liquid is deep berry-purple with magenta highlights, glossy and dense, reflectivity 8/10; cap is a glossy black domed half-cylinder/capsule shape, reflectivity 9/10; neck collar is dark metallic black-purple with a polished finish, reflectivity 8/10; front label text is printed white, low reflectivity 2/10; blueberries are dark blue-violet with a powdery matte skin, reflectivity 3/10; raspberries are saturated red-magenta with a bumpy drupelet texture, reflectivity 4/10; the blackberry is near-black purple with glossy highlights, reflectivity 5/10; the liquid splash and droplets are transparent magenta-purple, reflectivity 9/10. Color: bottle glass and liquid are truly smoky violet-purple and deep berry-purple respectively; magenta ambient lighting adds glow and highlights only, without turning the bottle flat neon pink. Branding: bold uppercase sans-serif wordmark "ORREN" centered on the lower front curved glass face at approximately 62–68% down from the top of the bottle body, spanning roughly 42–48% of body width; "BERRY BLAST" directly below in a smaller uppercase sans-serif with wider letter spacing, spanning roughly 32–38% of body width, both in white, following the bottle's tilt. Hardware: large glossy black dome cap fully seated and closed over a short polished dark collar/ring stack; no spray nozzle visible, no buttons, hinges, or ports. Background: no physical tabletop — the bottle appears floating in a stylized scene, dark purple-to-magenta gradient backdrop with soft blur and faint berry-leaf silhouettes in the upper-left, three depth layers (foreground floating droplets and berries, midground bottle with berry cluster and liquid splash, background dark leaves on the left and magenta gradient glow on the right), berry cluster crossing diagonally through the front of the bottle from lower-left to upper-right, minimal physical contact shadow with mostly internal CGI-style object and depth shadows. Lighting: key light from approximately 2 o'clock at cool-neutral studio white 5200–5600K producing a bright vertical highlight on the cap and right side of the glass, strong magenta-purple ambient fill from the front-left and background at approximately 4200–4700K and 35–45% of key intensity, strong dark shadow transition on the cap's left side and bottle edges, pink-purple rim highlights along the bottle edges and base, softbox-like white reflections and purple studio environment reflections on the cap and glass, moderate depth of field with the bottle, berries, and splash sharp while background leaves are softly blurred, shot with a 70–100mm product-lens compression. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text, no watermark. Sharp detail throughout the focal plane, natural material texture.
Use the uploaded image as the main visual reference for the face. CRITICAL: Use the exact face from the uploaded image, pixel-for-pixel identical — same eyes, nose, lips, jawline, and skin structure. Do not generate a new face or new bone structure. Do not reinterpret his facial geometry in any way. The face itself is fixed and unchangeable. However, match all styling exactly as shown in the uploaded photo, applied on top of that same face: the same hairstyle (jet-black side-swept hair with a glossy finish) and the same natural skin texture. These are styling details to replicate, not instructions to redesign the face. Generate a photorealistic portrait composition (roughly 2:3). His body is oriented diagonally across the frame from the west side to the east side — shoulders and torso angled starting from the left edge of the frame and extending toward the right edge, left hand tucked into his trouser pocket on the west side, right arm relaxed at his side toward the east side, head turned back toward camera with a direct confident gaze. Composed neutral expression with a very slight asymmetric lip corner lift, relaxed brows, relaxed neck, direct eye contact toward the camera. Clothing: a black tailored suit jacket with a notched lapel, white dress shirt with a spread collar, matte black slim necktie hanging full-length down the center of the shirt and tucked at the waistband, small white pocket square folded in the breast pocket, black trousers with a dark belt buckle. Accessory: a metallic wristwatch visible on the right wrist. Background: a dark charcoal-to-black gradient backdrop with soft uneven mottled texture, a slightly lighter gray patch in the upper-left corner, no depth layers or bokeh, background much darker than the subject, completely out of focus with no readable details. Lighting: a key light from the upper-left at approximately 5500-6000K, moderate-to-hard shadow edge along the right side of the face, neck, and jacket, low fill on the shadow side, subtle rim light along the right shoulder, shallow-to-moderate depth of field with focus locked on the face and eyes. Render at maximum photorealistic quality. Preserve the exact face, pose, outfit, lighting, color temperature, environment, and portrait framing. Do not change his identity or facial structure. Do not make him look like a different person. Do not change the suit color. Do not change the background setting. Do not remove or shorten the necktie. No extra people. No extra objects. No text. No watermark. No CGI look. No plastic skin. No anatomical errors. No beauty filter. No motion blur. No lens distortion. Ultra high resolution. Natural skin texture. Photorealistic only.
Use the uploaded image as the main visual reference. Recreate the same young adult female-presenting subject, same warm indoor café/home setting, same pale butter-yellow oversized knitted sweater, same wooden table and white ceramic cup, same close vertical portrait framing, and same golden late-afternoon atmosphere. Do not invent a new face, new outfit, new background, or a different camera perspective. Follow the uploaded image closely and apply only the corrections below. Generate a photorealistic image of the same young adult woman with an oval face, softly tapered chin, smooth jawline, moderately defined cheekbones, light warm-beige skin with a peach undertone, almond-shaped medium-large brown eyes, softly arched brown brows, a small straight nose with a rounded tip, and medium-full muted rose-coral lips. Her hair is medium-to-dark brown with warm caramel highlights, tied in a high ponytail with soft volume, while wispy straight bangs fall across the forehead. Use a vertical 9:16 composition. Show her in a waist-up / upper-body portrait, with the full top of her hair visible and the lower body cropped below the sweater waist area. Her body placement must follow the uploaded image more accurately: the figure runs diagonally across the frame from lower-left toward upper-right, with the sweater mass and torso starting broader on the left side of the frame and the face sitting higher and more toward the right side. Her torso is near-frontal but subtly angled, creating a clear west-to-east diagonal flow across the composition rather than a flat straight-on placement. Both elbows rest on or very near the wooden table, causing the shoulders to round slightly forward. Her head faces the camera with a very slight tilt. Both hands frame the face symmetrically: the hand on the left side of the image supports the left cheek and the hand on the right side of the image supports the right cheek, palms inward, fingers extended upward along the cheeks with soft natural curvature, and sleeves covering part of the hands. Keep everything close to the original uploaded image. Preserve the same facial identity, face shape, skin tone, eye shape, hair color, hairstyle, pale butter-yellow knit sweater, and overall appearance from the uploaded image. Refine the beauty details without changing identity: smooth but natural skin texture, soft satin-matte complexion, subtle peach blush placed high on the cheeks, light-to-medium coverage foundation, softly defined brown eyeliner, delicate mascara, neatly groomed natural brows, softly shaded eyelids in warm beige-brown tones, and muted rose-coral lips with gentle definition. Keep the expression natural and calm: lips slightly parted, brows relaxed, eyes open and softly focused. Direct eye contact toward the camera. Keep the same pale butter-yellow knitted sweater with a thick soft fuzzy wool-like texture, low-sheen finish, loose oversized fit, ribbed crew neckline, long sleeves, ribbed cuffs extending over the wrists, and soft folds around the arms, shoulders, and torso. No logos, no text, no buttons, no zipper, and no extra styling details. Keep the same foreground objects exactly: a warm wooden table surface along the bottom of the frame and a plain white ceramic cup at the bottom-right corner, partially cropped, with the handle visible. Keep the small ring visible on one finger of the hand on the left side of the image, and keep the very thin faint chain necklace near the neckline. The background should follow the uploaded image: a softly blurred indoor interior with warm brown and beige tones, darker than the subject, with approximately three visual depth layers — foreground table and cup, sharply focused midground subject, and a background of indistinct wall/furniture forms rendered in soft blur. No other people. No readable text. No strong décor details. No sharp objects in the background. The setting should feel like a quiet sunlit café corner or cozy home interior, but remain visually abstract and out of focus. Use the same lighting structure as the uploaded image, but describe and preserve it more precisely: warm natural sunlight enters from camera-left / front-left at approximately the 9 to 10 o’clock direction. The key light is soft-edged direct sunlight, around 4300K–4800K, striking the left/front planes of the face, bangs, cheek, nose bridge, lips, sweater shoulders, sleeves, and ponytail. The right side of the face and sweater falls into gentle warm shadow with moderate fill, so the shadows are visible but not deep black. Keep subtle hair-edge highlights, small warm catchlights in the eyes, and clear subject-background separation. The lighting should feel cleaner and more intentional than before: crisp but soft, warm but not orange, with flattering highlight placement and controlled contrast. Maintain shallow depth of field with sharp focus on the eyes, lips, hands near the face, and front plane of the sweater. Render at maximum photorealistic quality. Follow the uploaded image as the primary reference. Preserve exact facial proportions, diagonal body placement, pose, outfit, lighting direction, color temperature, indoor environment, table objects, and portrait framing. Do not change her identity. Do not make her look like a different person. Do not change the pale butter-yellow sweater color. Do not change the warm sunlit indoor setting. No extra people. No extra objects. No text. No watermark. No CGI look. No plastic skin. No anatomical errors. No over-smoothed beauty filter. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail on the subject. Natural skin texture. Photorealistic only.
Use the uploaded image as the main visual reference. Recreate the same young adult man, same snowy alpine pine-forest mountain setting, same sage-mint green jacket, same black scarf, same black shirt, same black cargo pants, same black boots, same dark sunglasses, same walking-forward pose, same full-body vertical portrait framing, and same cold snowy atmosphere. Do not invent a new face, new outfit, new background, or new camera angle. Follow the uploaded image closely and apply only the corrections below. Generate a photorealistic image of the same young adult man, approximately mid-to-late 20s, medium-tall height, athletic-slim build, warm light-beige skin with muted golden-olive undertone, oval-rectangular face, defined straight jawline, short boxed beard and connected moustache, dark black-brown thick hair styled upward with soft volume, wearing large black square aviator-style sunglasses, in a vertical 4:5 composition. He is centered in frame, walking directly toward the camera through deep white snow, torso facing forward, shoulders relaxed, right hand lifted to chest level holding the black scarf near the collarbone, left arm naturally lowered and slightly forward, one leg stepping ahead while the other trails behind, boots partially sinking into snow. Keep everything close to the original uploaded image. Preserve the same facial identity, face shape, skin tone, beard shape, hair color, hairstyle, black sunglasses, sage-mint green jacket, black scarf, black shirt, black cargo pants, black boots, and overall look from the uploaded image. Keep a relaxed neutral closed-mouth expression with calm facial muscles, no smile, no exaggerated emotion. Direct eye contact toward the camera through the sunglasses. Keep the same sage-mint green trucker-style winter jacket with matte cotton-twill texture, structured collar, chest flap pockets, visible seams, slightly padded body, subtle snow specks on the fabric, front opening revealing a plain black crew-neck shirt. Keep the same long black scarf wrapped around the neck, both scarf ends hanging vertically down the torso, soft wool texture, matte black surface. Keep the same black loose-fit cargo pants with side cargo pockets, slight wrinkling around knees and thighs, tapered lower leg shape, and black lace-up winter boots with snow buildup around the soles. No logos, no readable text, no extra accessories. The background should follow the uploaded image: a high-altitude snowy landscape with a white snow-covered ground plane in the foreground, dense snow-laden pine trees in the midground, bluish-gray misty forest layers behind, and pale fog-covered mountains fading into a cold sky. The background has strong depth separation: foreground snow sharp near the boots, midground pine trees moderately blurred, distant mountain and tree layers heavily blurred by fog and snowfall. Keep the background cool cyan-blue-gray with low saturation, soft atmospheric haze, and falling snow particles at multiple depths. The background must remain soft and out of focus with no clear facial details and no readable text. Use the same natural winter daylight: soft diffused overcast key light from upper front-left around 10 to 11 o’clock, large sky-dome modifier, low-contrast shadowing under the chin, scarf, jacket folds, and boots. Key light around 6500–7200K, fill light from surrounding snow around 7000K, mild blue-cyan bounce from the environment. Highlights should appear softly on the sunglasses, jacket shoulders, hair top, and snow surface. Depth of field should keep the man sharp while the snowy forest and mountains remain softly blurred. Render at maximum photorealistic quality. Follow the uploaded image as the primary reference. Preserve exact facial proportions, pose, outfit, lighting, color temperature, environment, snowfall, and portrait framing. Do not change his identity. Do not make him look like a different person. Do not change the sage-mint green jacket. Do not change the snowy alpine pine-forest setting. No extra people. No extra objects. No text. No watermark. No logo. No CGI look. No plastic skin. No anatomical errors. No beauty filter. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail on subject. Natural skin texture. Photorealistic only.
Generate a photorealistic product poster of a Lay's India's Magic Masala potato chips packet (deep blue packaging, front-facing, slightly crumpled with natural bag texture) surrounded by floating potato chips, red chilies, and masala spice elements against a deep royal-blue glowing background, in a square (1:1) composition, with the headline occupying the top-center negative space, the packet centered as the dominant focal point directly below it, floating chips and red chili motion streaks framing the sides, and a small credit line centered at the very bottom. Typography: render the following text exactly as written, with no spelling changes, no added words, and no dropped blocks — Headline: "Always" / "deliciously" / "distracting" (three stacked lines, center-aligned). Subhead: "none present". CTA/button: "none present". Price/badge: "none present". Fine print: "DESIGN BY LOKESH BGR". Typeface style: "Always" and "distracting" in a bold, rounded sans-serif, light blue-white color, centered; "deliciously" rendered larger than the other two lines in a flowing white handwritten script, centered between them; the fine-print credit line in small, low-contrast light-gray centered text at the bottom edge; normal letter spacing throughout, no drop shadows, no outlines, no gradients on the type — flat, clean coloring with only a soft ambient glow from the background. Product placement: packet centered horizontally and vertically in the lower two-thirds of the frame, occupying roughly 50–60% of the poster height, front-facing with a slight natural perspective tilt and realistic plastic-bag crumple, floating with a soft blue halo and subtle soft shadow/glow beneath it, no ground surface visible. On the packet itself, faithfully reproduce: a yellow circular badge centered on the bag with the red "Lay's" wordmark and white outline; "WAH!" in bold white rounded lettering directly above the badge with "Work At Home pack" in smaller white text beneath it; "India's Magic Masala" in white centered text below the badge; a small green "Potato Chips" dot-and-text mark near the bottom-left of the pack; a small nutrition information panel near the bottom-right of the pack (present but not fully legible); raw potato, sliced potato chips, red chilies, black peppercorns, and a wooden spoon of masala spice illustrated across the lower portion of the packaging artwork. Branding: Lay's red wordmark on a yellow circular badge with white outline, centered on the packet at roughly its upper-middle third; do not resize, distort, recolor, or relocate this logo. Color palette: dominant deep royal blue background and packet base (about 65% of the composition, medium-dark and highly saturated), bright yellow chips and Lay's badge as secondary accent (about 15%), saturated red chili and Lay's-logo red as accent (about 10%), white and light-blue headline text plus small glowing light particles as highlight (about 10%); the red logo/chili carries the brand-accent weight against the all-blue field. Background: deep blue gradient background with a soft glowing halo concentrated behind the packet, tiny scattered glowing light particles/stars across the frame, layered depth with a soft blurred back layer of gradient and glow, a blurred midground of motion-streaked flying chips and red chilies, and a sharp foreground of the packet and a few crisp chips; no other props, no watermark beyond the bottom-center credit text. Lighting: soft frontal light on the packet with a diffused blue glow emanating from directly behind it, subtle soft shadow beneath the pack, glossy specular highlights along the plastic packet's folds and surface, overall photorealistic CGI-composite finish, packet rendered in sharp focus while foreground and background chips/chilies carry motion blur, straight-on product-ad camera perspective. Render at maximum quality, matching the uploaded reference's exact layout, typography content and hierarchy, product geometry and color, branding placement, and lighting. No garbled, misspelled, duplicated, or invented text. No warping, no logo distortion, no added props, no watermark unless specified above. Sharp, legible type throughout; natural material texture on the product.
Use the uploaded image as the ONLY and PRIMARY visual reference. Recreate the same exact young adult male from the uploaded image with maximum identity lock. Do not generate a similar-looking model. Do not beautify, stylize, idealize, or replace the face. Preserve the exact same facial identity, same face proportions, same eye spacing, same brow shape, same nose shape, same lip shape, same jawline, same chin, same cheekbone structure, same skin tone, same light stubble pattern, same hairline, and same hairstyle. The uploaded image must control the result. Generate a photorealistic vertical 9:16 portrait of the same man. Frame only the upper body, not the full body. The subject is cropped around the lower forearm / lower torso area, with only a small part below the resting arm visible. The composition is a close portrait with the man as the dominant focus and the background completely blurred. Important left-right accuracy: the subject is facing the camera, so his RIGHT side appears on the viewer’s LEFT side. His head is turned and bent slightly toward his own right side in a subtle stylish pose, with the chin lowered a little. Keep this exact head angle. Do not make the head straight. Do not tilt it the wrong way. Pose lock: his RIGHT arm is raised upward toward his neck/collar area, and this raised wrist is wearing the watch. His right hand rests lightly near the side of his neck in a casual fashion pose. The sleeve on this raised arm is folded / cuffed, and this folded sleeve must remain visible. His other arm rests lower on a stone, concrete, or brick ledge in the foreground. Keep the pose close to the original image. Face lock details: young adult male, early-to-mid 20s, light warm ivory skin with a soft peach-beige undertone, oval-to-V face shape, narrow lower face, defined jawline, medium-high cheekbones, straight slim nose, dark almond-shaped eyes, thick dark eyebrows, soft medium-full lips, and light trimmed stubble on upper lip, chin, and jaw. Expression is calm and neutral with closed lips. Keep direct eye contact toward the camera. No smile exaggeration, no different eye shape, no sharper jaw, no altered nose, and no identity drift. Hair lock details: thick dense dark chestnut-brown hair, full volume on top, softly tousled, lifted upward and swept across with textured separated strands, shorter sides, natural soft finish, not overly glossy, not overly neat. Keep the same hairstyle and hair volume. Clothing lock details: the outer clothing is a light grey washed denim-style jacket, not a hoodie, not a blazer, not a sweater replacement. It has a soft faded grey look, visible stitching, collar, button placket, and chest-pocket seam details. Underneath is a plain white inner crew-neck shirt clearly visible at the chest. Keep both garments exactly. Do not change the outfit color, garment type, or layering. The folded/cuffed sleeve on the raised arm must remain visible and accurate. Watch lock details: keep the same watch on the raised RIGHT wrist. It is a round metallic silver-toned watch with a dark dial, chronograph-style face, visible markers, and a dark strap. Do not replace it with a different watch, smartwatch, gold watch, or plain minimal watch. Keep it close to the uploaded image. Foreground lock details: a stone / concrete / brick ledge is visible at the bottom foreground where the lower arm rests. Keep it subtle and partially visible only. Do not add extra foreground objects. Background lock details: the background is completely and heavily blurred, with no readable details and no visible people. It is an outdoor urban-style background with cool grey-blue tones and soft muted architectural shapes dissolved into blur. Keep the background secondary and fully out of focus. No extra people, no text, no signs, no scenery changes. Lighting lock details: soft diffused daylight, clean and even, coming from the front-left side, with gentle low-contrast shadows and soft highlights on the face, hair, hand, and watch. Keep the same natural editorial portrait lighting. No dramatic light, no warm sunset tone, no studio flash look. Render at maximum photorealistic quality. The uploaded image must remain the identity anchor. Preserve the exact same man, exact same face, exact same pose, exact same slight head bend toward his right side, exact same raised right hand with watch near the neck, exact same folded sleeve, exact same light grey jacket, exact same white inner shirt, exact same blurred background, and exact same close portrait framing. No face replacement. No beauty filter. No CGI look. No plastic skin. No extra objects. No extra people. No text. No watermark. No anatomy errors. Ultra high resolution. Sharp facial detail. Natural skin texture.
Use the uploaded image as the main visual reference. Recreate the same subject, same setting, same outfit, same objects, same framing, and same atmosphere. Do not invent a new face, new outfit, new background, or new camera angle. Follow the uploaded image closely and apply only the corrections below. Generate a photorealistic image of a young adult woman in her early-to-mid 20s, oval face with a softly tapered chin, moderately prominent cheekbones, narrow straight nose bridge with a softly rounded tip, in a 9:16 vertical portrait composition. Her torso is angled three-quarter, turned from lower-right toward upper-left, right shoulder dropped lower in frame; her head is turned downward and to the left with her chin lowered, face positioned slightly left of center, a thick braid running down over her right shoulder and chest. LOCKED — EYE GAZE (non-negotiable, do not default to open eyes or camera-facing gaze): Both eyes are lowered and nearly closed, lids drooped in a soft downcast position, gaze direction angled down and toward the lower-left of frame — away from the camera. There is no direct eye contact with the viewer. No catchlight is visible in either eye because the lids are lowered. Do not open the eyes. Do not redirect the gaze toward the lens. Do not add a catchlight. LOCKED — MAKEUP (non-negotiable, do not render bare-faced or minimal makeup): Full smooth matte-to-semi-matte foundation base evening the skin tone. Soft peach-pink eyeshadow wash across the lid extending toward the crease. Thin black eyeliner set close to the lash line, tightlined. Lashes visibly lengthened and darkened beyond natural lash density. Warm pink-toned blush concentrated on the upper cheeks/cheekbone area, blended upward toward the temple. Brows filled and shaped with visible defined hairstrokes, a soft arch, medium-thick density. Lips in a muted rose-pink satin finish, lower lip slightly fuller, cupid's bow clearly defined, a visible satin sheen rather than matte or glossy. This is a fully made-up beauty look, not a natural/no-makeup rendering. LOCKED — SKIN RETOUCHING / FINISH (non-negotiable, do not render raw unretouched skin and do not render an artificial plastic/beauty-filter look): Skin finish is heavily smoothed and evenly toned — a polished, porcelain-like surface with visible pore texture almost fully suppressed, but a faint natural sheen/glow remains along the cheekbone, nose bridge, and cupid's bow where the key light hits. Retouching level should read as high (heavy smoothing, blemish-free, even tone) while still keeping a soft micro-texture in the skin so it does not look like plastic, wax, or an AI beauty-filter overlay. No visible pores in shadowed areas; a faint softness/glow, not a flat matte plastic surface, in lit areas. Keep the same facial identity, face shape, hair color (dark espresso-brown base transitioning into warm copper-chestnut mid-lengths and ends where the braid catches light), hairstyle (crown braid running back from the hairline into a thick single plait falling over the right shoulder, loose face-framing strands left and right of the forehead, small black hair tie at the braid's end, fine flyaways catching the rim light), black high-neck top under a black structured outer layer, and overall look from the uploaded image. Her expression is calm and relaxed — softened brow, gently lowered/closed eyelids as locked above, relaxed closed lips, no tension in the jaw. Keep the same clothing: a fitted black turtleneck in a smooth stretch fabric sitting close to the neck, layered under a black structured jacket/blazer with a matte finish and a V-shaped open front edge, minimal clean folds near the shoulder and collarbone, no visible logos, buttons, or patterns. No additional foreground objects are present, so keep the frame free of props, hands, or held items. The background should follow the uploaded image: a fully out-of-focus outdoor-style backdrop in warm olive-brown and dark amber bokeh tones, noticeably darker and lower-contrast than the lit face, no discernible shapes, structures, or people, no readable text. Use the same lighting: a warm key light positioned at roughly the 10 o'clock direction relative to the face, soft and diffused with a low-contrast falloff, warm golden color temperature around 3200–3400K, brightest on the left forehead, cheek, nose bridge, upper lip, and loose hair strands, with a gentle shadow gradient along the right side of the face near the ear/jaw and beneath the braid. A subtle warm rim light traces the edges of the braid and flyaway strands. Shallow depth of field with the face in sharp focus and the background fully defocused, consistent with a portrait focal length around 85mm at roughly f/2.0. Render at maximum photorealistic quality. Follow the uploaded image as the primary reference. Preserve exact facial proportions, pose, outfit, lighting, color temperature, environment, and portrait framing, and — critically — preserve the exact eye gaze, makeup, and skin retouching level specified above rather than defaulting to open eyes, bare skin, or a flat plastic filter. Do not change her identity. Do not make her look like a different person. Do not change the black clothing color. Do not change the warm blurred outdoor setting. No extra people. No extra objects. No text. No watermark. No plastic/CGI look. No anatomical errors. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail on subject. Photorealistic only.
Use the uploaded image as the main visual reference. Recreate the same young woman, same nighttime portrait setting, same plum-purple outfit with matching neck scarf, same long wavy hair, same gold earrings, same framing, and same polished beauty-retouched atmosphere. Do not invent a new face, new outfit, new background, or a new camera angle. Follow the uploaded image very closely. Generate a photorealistic vertical portrait of the same young woman in a 9:16 composition, framed from the upper torso to slightly above the head. Place her near the center of the frame with a straight-on portrait orientation. Her shoulders face forward and her head is upright, looking directly into the camera with calm, confident eye contact. Keep the expression soft and composed with relaxed closed lips and no smile. Preserve the same facial identity, youthful age range, soft oval face shape, smooth fair skin, delicate jawline, refined chin, straight slim nose, full softly shaped lips, and symmetrical features. Keep the same polished soft-glam makeup: clean luminous skin, subtle peach-beige blush, lightly contoured cheeks, smooth base makeup, softly defined high-arched brows, neutral taupe-brown eyeshadow, precise black winged eyeliner, long separated lashes, and muted nude-rose lipstick with a soft satin finish. The skin should look highly refined and beauty-retouched but still photorealistic, with gentle natural texture and no plastic look. Preserve the same eyes: large almond-shaped eyes in a light hazel-grey to olive tone, with crisp irises, soft catchlights, and a focused direct gaze into the lens. Keep the brows thick, clean, and well-shaped. The overall face should look very clear, elegant, and studio-polished. Keep the same hairstyle exactly: very long, dense, dark chocolate-brown hair with soft warm undertones and a smooth glossy finish. The hair is parted near the center and falls in loose, flowing S-wave curls over both shoulders and down both sides of the chest. The hair should look full, silky, and carefully styled, with soft waves rather than tight curls. A small amount of hair frames the face naturally. The ears are mostly hidden beneath the hair. On the west side of the frame, she lightly holds a section of hair with one hand, and only a small part of that hand is visible. Preserve the same jewelry. She wears large gold hoop-style earrings with a textured or clustered beaded appearance, partially visible under the hair on both sides. The earrings should remain elegant and slightly hidden by the hair, not fully exposed. Keep the same outfit exactly. She is wearing a fitted plum-purple dress or top made of smooth matte fabric, with a modest V-shaped neckline opening at the upper chest. Around the neck is a matching plum-purple scarf band or choker-like fabric wrap made from the same material and color as the dress. The neck scarf sits close around the neck and continues the outfit design seamlessly. The outfit color should remain a rich deep plum-purple, with no pattern and no visible logos. The background should follow the uploaded image: a dark nighttime or studio-dark backdrop with soft blurred bokeh lights. Keep the background mostly black to deep navy, with several out-of-focus circular lights dispersed behind her. On the upper west side of the frame, include two large soft white blurred light circles. On the east side, include a pale grey circular bokeh light and a few smaller warm amber-orange blurred lights farther back. The background must remain soft, distant, and out of focus, with no visible objects, no readable text, and no extra people. Use soft frontal portrait lighting with a clean studio-beauty feel. The light should fall evenly across the face and hair, producing smooth highlights on the forehead, cheeks, nose bridge, lips, and hair waves, with very soft shadows and no harsh contrast. Keep the face tack sharp and the background strongly blurred. Use a portrait-lens look around 85mm with shallow depth of field, around f/1.8 to f/2.2. Render at maximum photorealistic quality. Follow the uploaded image as the primary reference. Preserve exact facial proportions, direct eye contact, hairstyle, hair volume, hair color, hand touching the west-side hair, gold earrings under the hair, plum-purple neck scarf, matching plum-purple dress, dark bokeh background, and elegant portrait framing. Do not change her identity. Do not change the outfit color. Do not change the hair style or hair length. No extra people. No extra objects. No text. No watermark. No CGI look. No plastic skin. No anatomical errors. No distorted hand. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail. Natural skin texture. Photorealistic only.
Use the uploaded image as the main visual reference for the face. CRITICAL: Use the exact face from the uploaded image, pixel-for-pixel identical — same eyes, nose, lips, jawline, and skin structure. Do not generate a new face or new bone structure. Do not reinterpret her facial geometry in any way. The face itself is fixed and unchangeable. However, match all styling exactly as shown in the uploaded photo, applied on top of that same face: the same makeup look (full smooth foundation coverage, soft peach-pink eyeshadow, subtle eyeliner, long enhanced lashes, light pink blush, glossy rose-pink lips, filled dark arched brows), the same hair (dark brown/black, tied back loosely with a soft off-center parting, loose face-framing strands on both sides), and the same heavy beauty-retouch/airbrushed skin finish. These are styling details to replicate, not instructions to redesign the face. Generate a photorealistic close-up beauty portrait, vertical 4:5 composition. She faces the camera directly, head level with a slight downward angle, leaning forward slightly, centered in frame. Her arms are crossed and folded in front of her, forming a resting surface for her chin — the upper forearm crosses horizontally right beneath the chin, while the other arm angles diagonally down toward the bottom-right of the frame, ending in a visible hand with fingers relaxed and slightly spread, short-to-medium nails in a nude/pale polish, and one thin band ring visible on a finger. Lower body remains out of frame. Clothing: a clean bright white long-sleeve top/sweater with a cool undertone, soft knit or smooth cotton-blend fabric, fitted-to-softly-relaxed fit, high or mock-neck area partially visible, long sleeves covering both forearms, no visible buttons, patterns, or logos, with smooth natural fabric folds around the crossed arms and lower frame. Keep the same accessory — the one thin band ring on the visible hand. No earrings, necklace, or watch. Background: a plain, soft light-gray blurred indoor/studio backdrop, slightly darker than the white clothing but lighter than the hair, with no objects, people, or text visible. Lighting: a soft frontal key light positioned slightly above camera level, diffused with low-shadow beauty lighting, evenly lighting the face with highlights on the forehead, nose bridge, cheeks, and lips, very soft shadows under the chin, hairline, and around the crossed-arm sleeve folds, strong fill with no harsh shadows, neutral-to-slightly-cool color temperature. Render at maximum photorealistic quality with the same heavy beauty-smoothing/airbrushed editorial finish as the reference. Preserve the exact face, the crossed-arms pose with the ring detail, makeup, hairstyle, outfit, lighting, and portrait framing. Do not change her identity or facial structure. Do not make her look like a different person. Do not change the white top. Do not change the background setting. Do not simplify the crossed arms into a single arm. No extra people. No extra objects. No text. No watermark. No anatomical errors. No motion blur. No lens distortion. Ultra high resolution. Photorealistic only.
Use the uploaded image as the main visual reference. Recreate the same young adult woman, same indoor minimal portrait setting, same cream-white knitted sweater, same hand-to-cheek pose, same close vertical framing, and same polished soft-beauty atmosphere. Do not invent a new face, new outfit, new hairstyle, new background, or new camera angle. Follow the uploaded image closely and apply only the corrections below. Generate a photorealistic image of the same young adult woman, approximately 20–25 years old, with a slim oval face, softly narrowed jawline, gently tapered chin, balanced forehead width, subtle cheek fullness, medium-high cheekbone placement, large almond-round brown eyes, straight refined nose, short philtrum, softly full peach-pink lips, and fair ivory-beige skin with a warm peach undertone, in a 9:16 vertical portrait composition. The subject is framed from the upper torso upward in a tight beauty portrait. She is facing the camera almost frontally with a very slight angle toward camera-right, and her left hand is raised to the side of her face, gently supporting the cheek and jaw area. Keep everything close to the original uploaded image. Preserve the same facial identity, face shape, skin tone, eye shape, hair color, hairstyle, cream-white knit sweater, and overall look from the uploaded image. Preserve the same soft closed-mouth smile, relaxed forehead, relaxed brows, relaxed eyelids, softly lifted mouth corners, and calm confident direct eye contact toward the camera. Keep the same hairstyle exactly: deep medium-to-dark chestnut brown hair with a neutral-warm brown undertone, smooth glossy surface, center parting, soft root volume, and long straight-to-gently-wavy lengths falling over both shoulders. The hair fibers are sleek, neatly grouped in soft sections, with minimal frizz, subtle inward curvature near the ends, and a clean polished salon finish. The hairline is soft and natural, with no messy updo, no bangs, and no exaggerated flyaways. Keep the same elegant loose-down hairstyle from the uploaded image. Keep the same clothing exactly: a cream-white knitted sweater with a soft fine-gauge ribbed texture, high crew neckline, and long fitted sleeves with extended ribbed cuffs. The sweater fabric should look soft, matte, cozy, and clean, with no logos, no text, no jewelry, and no extra accessories visible. Keep the same pose of the left hand placed beside the face, with the palm lightly supporting the cheek, fingers softly curved near the ear and jaw, and the elbow out of frame. Keep the same natural hand proportions and delicate feminine hand placement. Keep the same makeup style from the uploaded image: polished natural beauty makeup with even skin, subtle luminous base, softly groomed medium-thickness brows, warm brown tight eyeliner, softly blended beige-brown eye shadow, fine upper lashes with clean mascara definition, lightly brightened under-eyes, soft peach-rose blush, very subtle nose contour, and smooth peach-pink lips with a satin-matte gradient finish. Do not make the makeup heavy, dramatic, glossy, glittery, or editorial. Keep it clean, refined, soft, and commercially attractive for a website portrait. Preserve the same skin glow and filter treatment: smooth luminous complexion with controlled highlight on the forehead center, bridge of the nose, nose tip, upper cheeks, and above the lips. The finish should look softly dewy but not oily. Apply subtle high-end portrait retouching and beauty cleanup at about 7/10 intensity: refine pores slightly, smooth minor texture, soften transitions, brighten the under-eye region, and polish the complexion while still preserving believable natural skin structure. The image should feel lightly filtered in a premium beauty-photography way, not artificial, not airbrushed to plastic, and not oversharpened. The background should follow the uploaded image: a simple indoor background with two main depth layers. Layer 1 is a soft warm off-white to beige wall area on the left side of the frame. Layer 2 is a darker vertical panel or curtain area on the right side in muted charcoal-beige tones. Both layers are softly blurred with shallow depth of field, low background detail, no visible text, no readable objects, no bokeh circles, and no background people. The background must remain quiet, uncluttered, and secondary to the face. Use the same lighting description from the scan: soft diffused key light coming from camera-front-left at approximately the 10 o’clock position, slightly above eye level, with a large window-light or softbox effect. Estimated key light temperature around 4700K to 5200K, with very soft neutral fill from the front and slight ambient warm bounce in the room. Highlights should appear clean and soft on the forehead, cheeks, nose bridge, lips, and hand. Shadows should be extremely gentle under the jawline, around the nose edges, beneath the hand, and along the hair on camera-right. Use shallow depth of field with sharp focus on both eyes, eyelashes, brows, lips, and the front plane of the face. Render at maximum photorealistic quality. Follow the uploaded image as the primary reference. Preserve exact facial proportions, pose, hand placement, hair styling, sweater texture, skin glow, makeup balance, retouching style, lighting, color temperature, confident expression, and portrait framing. Do not change her identity. Do not make her look like a different person. Do not change the cream-white knitted sweater. Do not change the long center-parted chestnut-brown hairstyle. Do not change the hand-to-cheek pose. Do not change the soft polished smile. No extra people. No extra objects. No text. No watermark. No CGI look. No plastic skin. No anatomical errors. No beauty filter overload. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail on subject. Natural skin texture with premium retouching. Photorealistic only.
Use the uploaded image as the main visual reference. Do not invent a new product shape, material, branding, camera angle, background, or lighting style — follow the uploaded product image closely and recreate it as a high-end cosmetics advertising hero shot. Generate a photorealistic image of a black-and-gold luxury face cream jar placed among irregular charcoal-black volcanic rocks in a vertical 2:3 composition. The jar is the main center subject, positioned slightly above the vertical midpoint, sitting diagonally across the frame with its left/west side slightly lower and its right/east side slightly higher, creating a subtle tilted hero angle. The camera is close to the product at a low macro product-photography angle, looking slightly upward and forward at the jar label. The lid is closed. Material and finish: the jar body is a short cylindrical cosmetic cream container with a smooth satin-matte black label wrap, rounded cylindrical edges, a slightly recessed lower base rim, and a metallic champagne-gold screw cap with a smooth reflective finish. The cap has soft curved highlights along the upper rim and a brighter vertical highlight on the right side. The black label has a low-reflective satin surface with very fine dust-like speckles visible under the studio light. The jar base has a darker glossy black lower ring with subtle curved reflections. Color: the jar body is deep black with very low saturation and low brightness, shifted slightly warm by golden bounce light. The cap is warm champagne gold with medium saturation and high brightness on highlight areas, darker amber-gold on the shadow side. The charcoal rocks are black and dark graphite with low saturation, rough grey-white mineral edges, and warm orange-gold reflections where the light hits them. The background is a golden brown blurred gradient, medium saturation, with warm amber brightness behind the product. Branding: the front label has a large centered white capital “B” printed on the black surface, sharp and clean. Beneath it is small gold brand text reading “BINYOM,” followed by smaller white text reading “OCDEARS CREAM,” with tiny decorative dot lines around the text. On the west/left side of the label there is a small thin gold line drawing of a house-shaped logo inside a square-like mark. Keep the branding placement, scale, spacing, and alignment exactly like the uploaded image; no distorted letters, no invented logo, no extra text. Hardware: no pump, no nozzle, no transparent glass, no open lid, no cream visible. Only a closed cosmetic jar with a metallic gold cap and wrapped black label. Background: the product rests in a rugged bed of charcoal rocks. On the west/left foreground, a large sharp charcoal rock rises from the lower-left corner, rough and jagged, partially framing the jar. On the east/right foreground, several dark jagged rocks sit close to the camera, forming a rough border around the lower-right and mid-right edge. Directly below the jar, smaller charcoal pieces are sharply visible and catch warm golden light, creating a glowing ember-like effect without flames. Behind the jar on the west/left rear, a tall charcoal rock is heavily blurred, positioned near the upper-left edge. Behind the jar on the east/right rear, a taller blurred charcoal rock mass rises behind the cap, with strong depth blur showing it is far from the focal plane. The far background is a smooth warm golden-brown studio blur with no visible room, no horizon line, and no extra props. Lighting: warm key light from the east/front-right side at approximately 2 o’clock, low-to-medium angle, creating bright gold reflections on the right side of the cap, the jar rim, and the right-facing rock edges. A weaker warm bounce light comes from below the jar, creating a soft golden glow between the charcoal pieces and under the product base. The west/left side of the jar remains darker but still readable. Soft rim highlights appear on the top cap edge and selected rock edges. Shadows are deep, soft-edged contact shadows under the jar and between rocks. Background blur is strong, with the jar label and nearby rocks in focus, rear rocks heavily out of focus, and extreme foreground rocks slightly softer from shallow depth of field. Use a macro lens look around 70–100mm, wide aperture around f/2.8–f/4, with focus locked on the jar label and front rim. Render at maximum photorealistic quality, matching the uploaded image’s exact product geometry, diagonal placement, material finish, color palette, label layout, rock arrangement, golden blurred background, warm studio lighting, shallow depth of field, and premium advertising framing. No CGI look, no plastic-render look, no warped jar, no melted cap, no logo distortion, no added props, no flames, no smoke, no watermark, no extra typography outside the product label.
Use the uploaded image as the main visual reference. Recreate the same seated young adult female subject, same urban stair setting, same cool-toned wall background, same muted violet streetwear outfit, same black cargo pants with stitched patch details, same matching muted violet high-top sneakers, same accessories, same front-facing seated pose, same vertical portrait framing, and same soft clean city atmosphere. Do not use or reference any other image. Follow only this uploaded image closely and apply the corrections below. Generate a photorealistic image of the same young adult woman, approximately 20–25 years old, slim build, pale ivory skin with a cool pink undertone, small oval-heart face shape, softly pointed chin, smooth narrow jawline, high cheekbones, straight refined nose, full soft pink lips, large almond-shaped dark brown eyes, neat straight brows, and long cool-toned mauve-lavender ash-brown hair in a half-up high ponytail. Use a 9:16 vertical portrait composition. The subject is sitting on grey concrete steps beside a building wall. Her body faces forward with a slight relaxed lean toward the wall on camera-right. Her left leg is bent upward close to her body on the camera-right side, showing the matching muted violet high-top sneaker near the lower-right foreground. Her other leg extends downward toward the lower-left side, with the black cargo pants visible and one ripped knee opening. Her left forearm rests across the raised knee, with the wristwatch visible. Her other hand rests naturally between her legs near the lower center of the frame. Keep this exact seated pose and body balance. Preserve the same facial identity, face shape, skin tone, eye shape, hairstyle, hair color, hoodie, cargo pants, shoes, and overall look from the uploaded image. Keep a calm neutral expression with relaxed forehead, relaxed brows, open steady eyes, relaxed cheeks, softly parted lips, relaxed jaw, and still neck. Maintain direct eye contact toward the camera. Hair correction: keep the exact hair color from the uploaded image — a muted smoky mauve-lavender brown with ash-violet undertones, slightly darker roots, and a soft cool desaturated purple cast. Keep the same center part and half-up high ponytail. Keep the soft loose face-framing strands visible around the temples, forehead sides, and cheeks. These wispy strands should lightly contour the face without covering the eyes, nose, or lips. Keep the same hoodie, but match the color more accurately to the reference image: it is not a bright purple and not a pink-purple. It is a muted dusty violet / grape-lilac tone with a cool bluish undertone, slightly desaturated, soft and matte, with even color across the fabric. The hoodie should have a relaxed oversized fit, soft fleece/cotton texture, ribbed cuffs, hood around the neck, and drawstrings. Keep the small front graphics/patches subtle and close to the reference image, including the black rectangular chest patch and surrounding small decorative badges, but do not invent large new logos or distracting readable text. Shoes correction: the shoes should match the hoodie color family closely. Keep the same muted dusty violet / grape-lilac tone as the hoodie, with a cool desaturated finish, not brighter and not a different purple shade. Keep the same high-top platform design, thick white sole, rounded toe shape, padded structure, and multiple front strap details. The camera-right shoe should remain larger in the lower-right foreground due to perspective. Pants correction: keep the same black cargo pants with a loose streetwear fit, straps, buckles, pocket flaps, metal rings, and one ripped knee opening on the lower-left leg. Very important: include the same kind of stitched patch / badge details on the pants. These are not plain pants. On the lower-left thigh and shin area, include multiple embroidered badge-style patches stacked vertically, each with different shapes and small colorful graphic designs. On the raised camera-right leg, include a circular embroidered patch near the knee area and a small white emblem/patch higher up, plus the visible ring hardware and cargo pocket structure. Keep these patch details similar in quantity, placement, and feel to the uploaded image. They should look like sewn-on streetwear badges, not tattoos, not printed illustrations, and not random logos. Keep the same accessories: small silver hoop earrings, a delicate silver necklace with a small round pendant centered at the upper chest, a wristwatch with a round silver face and dark strap on the forearm resting across the raised knee, a thin bracelet, and a simple ring on the resting hand. Wall correction: the background walls must match the uploaded image accurately. On camera-right, there is a dark charcoal-grey textured stone or granite-clad wall with a dense speckled surface and visible horizontal seam lines between large rectangular panels. On camera-left and behind the subject, there is a smoother cooler grey-blue architectural surface with a darker recessed vertical section. Keep both wall types distinct and correctly placed: textured dark wall on the right, smoother cool grey structural wall on the left. Keep the grey concrete steps below. The background should stay clean and minimal with no extra people, no cars, no signs, no added objects, and no readable text. Use soft diffused daylight from camera-left/front-left, around 6000–7000K, creating gentle highlights on the forehead, nose bridge, cheeks, lips, hair, hoodie folds, watch face, earrings, necklace pendant, and shoe edges. Shadows should be soft and cool, falling along the wall-side of the face, under the chin, under the raised arm, inside hoodie folds, and between the concrete steps. Use shallow depth of field with sharp focus on the face, face-framing hair strands, upper body, and front shoe, while the background remains softly out of focus. Render with a natural, soft, clean photographic finish. No visible noise. No grain. No harsh sharpening. No gritty texture. No over-smoothed plastic skin. Keep subtle natural skin texture, realistic pores, gentle tonal variation, and clean realistic highlights. The image should feel natural, soft, clean, high-resolution, and photorealistic, not CGI and not anime. Render at maximum photorealistic quality. Follow the uploaded image as the only primary reference. Preserve exact facial proportions, seated pose, wall structure, concrete steps, muted dusty-violet hoodie color, matching shoe color, black cargo pants with stitched badge patches, accessories, hairstyle, face-framing hair strands, exact mauve-lavender ash-brown hair color, lighting, camera angle, and portrait framing. Do not change her identity. Do not make her look like a different person. Do not change the outfit design. Do not simplify the pants. Do not remove the sewn patches. No extra people. No extra objects. No watermark. No CGI look. No plastic skin. No anatomical errors. No heavy beauty filter. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail on subject. Photorealistic only.
Use the uploaded image as the main visual reference for the face. CRITICAL: Use the exact face from the uploaded image, pixel-for-pixel identical — same eyes, nose, lips, jawline, and skin. Do not generate a new face or new facial proportions. Do not reinterpret her facial geometry in any way. The face itself is fixed and unchangeable. However, match all styling exactly as shown in the uploaded photo, applied on top of that same face: the same makeup (smooth full-coverage base, subtle darkened lash line, long defined lashes, minimal blush due to the wet/rain effect, natural pink glossy lips, dark groomed brows), the same hair (dark brown, soaked wet, long strands stuck to the face and neck, pulled back under the cap with loose dripping strands), and the same wet, glossy, rain-soaked skin sheen. These are styling and effect details to replicate, not instructions to redesign the face. Generate a hyper-realistic cinematic close-up portrait, vertical 9:16 composition, cropped at the upper torso, subject placed slightly right of center with the shoulder/upper arm filling the lower-left foreground. Body angled in a three-quarter side turn toward frame-right, one shoulder forward creating a strong diagonal, head turned toward frame-right in three-quarter profile but eyes looking back toward the camera with intense, dramatic eye contact. Brows slightly tense, lips parted, eyes wide and focused. Accessories: large black over-ear headphones worn over the cap and ears, a dark charcoal/black wet baseball cap with an orange rectangular patch on the front panel, covered in raindrops and water streaks, and a black backpack-style strap visible over the shoulder. Clothing: a dark wet outer jacket with a mottled brown-olive-black camouflage-style pattern, heavy wet cling with glossy water droplets and textured folds, fitted close to the body around the shoulder, no clear logos besides the cap patch. Background: a blurred rainy outdoor/urban environment, soft teal-gray tones with visible rain streaks and a warm orange blurred light source on frame-right, darker and cooler than the lit face, no people, objects, or text. Lighting: a soft directional key light from the front-right/upper-right, diffused but high-contrast, enhanced by rain reflections, lighting the face, lips, nose bridge, eyes, cap brim, raindrops, and wet hair strands, shadows on the left side of the headphones, cap underside, neck, and shoulder folds, moderate cool fill, subtle cool rim light on the cap, hair, and rain droplets, bright wet catchlights in both eyes, cool teal-gray ambient light with a small warm orange glow in the background. Render at maximum photorealistic quality with the same cinematic teal-orange color grade, strong contrast between the pale wet face, black cap/headphones, and dark rainy background. Preserve the exact face, pose, rain effect, outfit, lighting, and framing. Do not change her identity or facial structure. Do not simplify or remove the camouflage pattern on the jacket. Do not change the cap or patch color. Do not change the background setting. No extra people. No extra objects. No text. No watermark. No anatomical errors. No motion blur beyond the rain streaks. No lens distortion. Ultra high resolution. Photorealistic only.
Use the uploaded image as the main visual reference. Recreate the same young adult male subject in a high-fashion black-and-white studio portrait. Keep the same square 1:1 composition, same direct camera-facing pose, same calm intense expression, same hand placement concept, same hairstyle, same black clothing, same lighting contrast, same soft monochrome background, and same editorial retouching style. Do not invent a new face, new outfit, new hairstyle, new hand pose, or new background. Generate an ultra-photorealistic monochrome portrait of the same young man, framed from the upper chest to the top of the head. The subject is centered in the frame, facing the camera directly with a still, controlled, fashion-editorial expression. His head is upright overall but bent very slightly toward the west-side hand in a deliberate stylish way, creating a subtle fashion pose rather than a stiff straight pose. His eyes lock directly into the camera, lips remain closed, jaw relaxed but defined, and facial muscles calm with no smile. Preserve the same face shape and facial structure: slim angular oval face, sharp cheekbones, straight narrow nose, strong dark eyebrows, deep-set almond-shaped eyes, defined jawline, smooth chin, and symmetrical front-facing gaze. The expression should feel composed, serious, elegant, and quiet — not angry, not smiling, not exaggerated. Preserve the same hairstyle: dark black hair with a soft satin shine, thick volume on top, swept diagonally from the west side toward the east side of the frame, with layered strands. Several thin front strands fall naturally over the forehead and slightly between the brows, with one longer strand dropping toward the center of the face. The hair should look styled but not overly perfect, with natural texture, soft separation, and subtle shine highlights across the top. The west-side hand of the frame must remain posed beside the face in the same stylish position. The hand rises from the lower west side of the frame, wrist vertical, fingers placed near the temple and cheek in a fashion-editorial pose. The index finger should not look like it is only lightly touching the head. Instead, it should feel intentionally posed in style, with the fingertip aligned along the temple/forehead area while the head bends slightly toward that finger, creating a refined interaction between hand and head. The lower fingers curve naturally near the cheek, and the thumb rests subtly near the jawline. The hand should look elegant, relaxed, and deliberate, not stiff or accidental. Keep the same ring on the west-side hand: a large statement ring with a dark oval black stone set in a silver-toned ornate metal band. The ring is visible on the prominent finger near the cheek, catching light strongly. It should look like a bold vintage signet-style ring, not a simple plain band, not gold, not multiple rings. Keep the same outfit: a plain black high-neck turtleneck or fitted roll-neck sweater. The clothing is very dark and blends softly into the black-gray background, especially around the lower chest and shoulders. The fabric should look matte, smooth, and minimal, with no logos, no text, no zipper, no pattern, and no visible accessories besides the ring. The clothing edges should be slightly soft and less detailed than the face and hand. Use a black-and-white monochrome color grade only. The entire image should be grayscale with deep black shadows, charcoal-gray background, pale silver highlights on the face and hand, and only a very subtle pale gray light presence on the east side of the background. No warm color, no skin color, no colored eyes, no colored background. The background must remain minimal and studio-like: dark charcoal-gray backdrop with a smooth grainy texture. The west and center background should be deep gray to almost black. On the east side of the frame, include only a soft and restrained pale gray-white blur or faint vertical glow. It must be much weaker, softer, and less bright than before — just a delicate tonal lift in the background, not a strong bright white glow and not a distracting highlight. The background should have no objects, no furniture, no text, no windows with detail, no people, and no readable elements. Lighting must match the uploaded image: high-contrast black-and-white chiaroscuro portrait lighting. Use a strong soft key light from the upper-west/front-left side, around 9 to 10 o’clock. The west side of the face and the west-side hand are brightly illuminated with smooth silver highlights. The east side of the face falls into deep shadow, especially around the eye socket, cheek, ear, and side of the hair. The nose bridge, lips, cheekbone, fingers, and ring should catch crisp but soft highlights. Keep the shadows dark but detailed enough to preserve facial structure. The focus must be strongest on the eyes, face, hand, and ring. The turtleneck and lower shoulders should be slightly softer and blend into the background. Use shallow depth of field, subtle studio blur, and a classic editorial portrait look. Add visible fine film grain across the image, especially in the background and shadow areas. Retouching should be polished but natural: smooth skin, visible facial structure, no plastic skin, no beauty-filter shine, no over-sharpening. Camera style: square 1:1 portrait, close-up crop, approximately 85mm portrait lens look, f/2.0 to f/2.8 depth of field, high contrast, monochrome editorial fashion photography, sharp facial detail, soft background falloff, subtle vignette, fine black-and-white film grain. Negative prompt: no color image, no overly bright east-side white glow, no harsh white background patch, no smiling, no teeth, no open mouth, no sunglasses, no beard, no mustache, no extra jewelry, no extra rings, no earrings, no necklace, no watch, no tattoos, no different hand pose, no weak accidental finger touch, no stiff straight head pose, no missing hand, no distorted fingers, no extra fingers, no wrong ring, no gold ring, no casual background, no outdoor scene, no bright white background, no full-body shot, no side profile, no looking away, no messy unstyled hair, no shaved head, no long hair, no hat, no hoodie, no jacket, no shirt collar, no text, no watermark, no CGI look, no anime style, no painted effect, no plastic skin, no heavy blur on face, no lens distortion, no low-resolution detail.
Use the uploaded image as the main visual reference. Recreate the same infant baby, same soft purple-blue bokeh studio background, same knitted blue beanie with pom-pom, same knitted blue sweater with flower decorations, same close-up portrait framing, and same gentle dreamy atmosphere. Do not invent a new face, new outfit, new background, or new camera angle. Follow the uploaded image closely. Generate a photorealistic vertical 9:16 close-up portrait of the same infant baby lying forward on a soft white fuzzy rug or blanket. The baby’s body must be placed diagonally from the upper-left / 11 o’clock direction toward the lower-right / 5 o’clock direction. The head is large in frame, centered slightly upper-middle, with the torso filling the lower half. Keep the baby close to the camera, with the face as the sharpest focus point. Preserve the same facial identity and proportions: round soft infant face, smooth full cheeks, small rounded chin, tiny nose, wide-set large eyes, short brow-to-eye distance, small open mouth, and delicate baby features. The skin should be bright clean porcelain-peach with warm pink undertones, softly retouched but still natural, with very fine baby skin texture, gentle cheek blush, and soft highlights on the forehead, cheeks, nose bridge, and chin. Avoid plastic or artificial skin. The baby’s eyes must match the reference: large round blue eyes, vivid iris color around hue 205–215°, bright sky-blue to azure tone, dark outer limbal ring, glossy wet catchlights, and direct eye contact with the camera. The gaze should feel curious and engaged. Eyebrows are very light brown, thin, soft, and barely defined. A few fine light brown / honey-blonde hair strands should be visible under the front edge of the beanie, mainly around the left side of the forehead. Expression: keep the same open-mouth soft smile with a surprised baby look. The lips are slightly parted, upper lip smaller, lower lip fuller, mouth open naturally with a dark inner mouth shadow, cheeks gently lifted, eyes wide open, and no exaggerated cartoon expression. Keep the same knitted beanie: thick ribbed winter hat in saturated periwinkle-cobalt blue, close to #4F7FD6 / hue 215–222°, with lighter highlights on the ribbed threads and darker blue shadows inside the knit grooves. The beanie covers most of the forehead and ears, with a large fluffy pom-pom on top. The pom-pom should be round, soft, fuzzy, made of many short yarn strands, in the same blue family but slightly lighter on the lit edges. The ribbing must be clearly visible, vertical and thick, wrapping around the head. Keep the same knitted sweater: chunky textured royal-cobalt blue sweater, slightly darker than the beanie, around #2F68C2 to #3F78D0, with visible knitted yarn loops, ribbed sleeves, soft folds, and thick winter fabric. Near the upper chest / neckline, add the same small raised flower decorations: about four blue knitted floral appliqués, one noticeably smaller, with tiny bead-like centers. The neckline is rounded and soft, sitting below the chin. The baby’s hands should be partially visible at the bottom edge, resting on the white fuzzy rug or blanket. The hands must not be fully shown; fingers are cropped and softly blurred by depth of field, matching the reference. The foreground rug/blanket is creamy white, fluffy, and out of focus. The background should follow the uploaded image exactly: a soft, fully blurred purple-blue studio bokeh background with no clear objects, no people, no text, and no readable details. Use a violet and blue gradient background, with main colors around hue 240–270° purple and hue 215–230° blue. Include soft circular bokeh lights fully mixed into the background: pale lavender, blue-violet, and pink-magenta orbs, with very soft edges and heavy blur. Place a few larger blurry circles near the upper-right and upper-left areas, with smaller scattered light spots across the background. The background must remain much softer than the baby, with no sharp edges. Lighting: use soft diffused front-left lighting from around 10–11 o’clock, large modifier, cool-neutral daylight around 5200–5600K. Keep bright highlights on the baby’s eyes, forehead, nose, cheeks, lips, and knitted yarn edges. Use very soft shadows under the beanie brim, under the chin, inside the sweater folds, and around the lower face. Add gentle fill light from the front to keep the face bright and clean. No harsh shadows. Camera and rendering: photorealistic baby portrait, shallow depth of field, 85mm portrait lens look, f/1.8 to f/2.2, sharp focus on eyes and central face, soft blur on hands, sweater edges, blanket, and entire background. Use high-end baby photography retouching: clean, bright, soft, polished, but still natural. Ultra high resolution, realistic knitted fiber texture, realistic skin, realistic eyes, no CGI look, no doll-like face, no plastic skin, no anatomical errors, no extra objects, no extra people, no text, no watermark, no lens distortion.
Macro close-up commercial food photography of five sushi roll pieces stacked vertically, leaning diagonally from upper-left to lower-right, floating suspended in mid-air with no plate or surface beneath them. Portrait 9:16 aspect ratio. Framing lock: The entire sushi stack must be fully contained within the frame with a small safe margin on all sides — nothing touching or crossing the top, bottom, left, or right edges. Do not crop, cut off, or let any part of the sushi extend beyond the canvas boundary. Center the stack with balanced negative space around it, sized slightly smaller within the frame than a full bleed composition. All flying sesame seeds must also stay fully inside the visible frame — none exiting or touching the edges. From top to bottom: a sushi piece with white rice exterior densely coated in toasted white and black sesame seeds; a piece topped with glossy seared orange salmon with dark caramelized grill marks; a piece with a dark reddish-brown charred glazed topping and sesame along its edge; a piece coated in a dry granular green herb/seaweed crumb; a piece with a glossy red topping showing fine granular texture and bright specular highlights. Cross-sections show rice, a dark seaweed layer, and cucumber/avocado-like green filling inside. Dozens of white and black sesame seeds frozen mid-air around the stack, concentrated on the left side but fully within frame, suggesting frozen motion. Hard directional key light from the upper-left, warm rim light from the back-right separating the food from a dark black-to-deep-red blurred background with a warm glow. Deep dramatic shadows, low fill light. Shallow depth of field, sushi stack in crisp sharp focus, background and distant sesame seeds softly blurred. High-contrast, glossy, cinematic commercial food photography retouching, premium editorial advertising mood. No props, no cutlery, no napkin, no liquid, no condensation, no steam. Composition note: full subject visible, no edge-cropping, comfortable margin on all four sides.
Ultra-realistic cinematic commercial poster design for a premium orange juice brand, vibrant orange juice bottle placed perfectly in the center composition, glossy realistic bottle with fresh condensation water droplets, two half-cut oranges partially hidden diagonally beside the bottle, one orange positioned upper left side and the second orange positioned lower right side creating dynamic asymmetrical balance, energetic orange motion blur effects flowing around the composition, fresh orange leaves scattered softly around all corners of the poster, soft orange atmospheric blur on the left side background, luxury beverage advertising aesthetic, stylish special offer badge attached near the upper right edge of the bottle inspired by modern mango drink advertisements, dramatic curved water splash flowing from the special offer badge toward the lower left side in smooth motion, realistic liquid dynamics and splash physics, premium citrus freshness feeling, cinematic studio lighting with glossy reflections, vibrant natural orange tones, subtle depth of field, clean modern commercial background, realistic fruit textures, high-end beverage campaign style, elegant italic handwritten typography at the top saying “Freshly Squeezed”, below it bold clean modern font saying “Fresh Juice”, premium advertising layout, professional poster composition, realistic shadow behavior, ultra-detailed commercial photography, Canon EOS R5, 85mm lens, cinematic product lighting, Kodak Portra inspired color grading, luxury juice advertisement aesthetic
Generate a photorealistic image of a green glass dropper bottle branded FALOETT, a rounded-rectangle cosmetic serum bottle with a thick refractive glass base, gold screw collar, and black rubber dropper bulb, resting on a glossy dark green marble platform beneath a horizontal orchid branch, in a 4:5 vertical portrait composition, straight-on view with a slight downward camera angle of approximately 5–8 degrees, dropper cap fully seated and closed. Material and finish: bottle body is deep emerald green transparent glass with heavily radiused corners (approximately 8–12mm radius) and a thick refractive base, reflectivity 9/10; internal liquid is dark green, dense and glossy, reflectivity 7/10; a transparent glass pipette tube is faintly visible inside the neck, reflectivity 6/10; collar is polished metallic gold, warm yellow-gold hue, reflectivity 9/10; dropper bulb is glossy black rounded rubber, reflectivity 8/10; front label text is printed white with low reflectivity 2/10; platform is glossy green marble/stone with dark veining and a wet-looking reflective surface, reflectivity 7/10; orchid petals are cream-yellow with pink centers and brown speckling in a soft satin/matte texture, reflectivity 3/10; branches and buds are brown-green woody stems with olive-green buds in a satin texture, reflectivity 3/10. Color: bottle and liquid are a saturated deep emerald green (low-to-medium brightness, high saturation); gold collar and black bulb remain their true warm-gold and true black despite green ambient tint, which adds botanical bounce light only. Branding: white uppercase sans-serif wordmark "FALOETT" centered on the curved front glass face, positioned about 40–45% down from the top of the bottle body and spanning roughly 32–36% of body width; two tiny unreadable white microtext lines directly below as decorative product text only, not legible claims. Hardware: black rounded rubber dropper bulb seated on a polished gold screw collar with a glass pipette descending into the bottle, cap fully closed; no spray nozzle, pump, buttons, hinges, or ports. Background: glossy green marble platform with dark veining directly beneath the bottle, soft dark green studio backdrop with blurred dappled botanical light-shadow patterns, three depth layers (foreground reflective platform edge with small petals/buds, midground bottle with marble block and crossing orchid stem, background soft-focus green wall with leafy shadow patterns), main orchid branch running horizontally above the bottle with a large orchid cluster upper-right and one orchid partially cropped lower-right, soft contact shadow directly under the bottle with a subtle cast shadow across the glossy surface. Lighting: key light from approximately 10 o'clock angled downward at warm-neutral 5200–5600K producing a vertical white highlight on the left side of the bottle, bright gold reflections on the collar, and a glossy highlight on the black bulb; green-tinted ambient fill at approximately 4300–4800K and 45–55% of key intensity; subtle rim highlights along the bottle shoulders and right glass edge; softbox-shaped white reflections and green studio surface reflections visible on the glass; moderate depth of field with the bottle and nearby orchids sharp and the background softly blurred, shot with a 70–100mm product-lens compression. Render at maximum photorealistic quality, matching the uploaded image's exact product geometry, material, color, branding placement, lighting, and framing. No CGI or plastic-render look, no warping, no logo distortion, no added props or text, no watermark. Sharp detail throughout the focal plane, natural material texture.
Use the uploaded image as the main visual reference. Recreate the same young adult female-presenting portrait subject, same outdoor waterside setting, same brown cable-knit sweater outfit, same seated upper-body framing, and same warm natural atmosphere. Do not invent a new face, new outfit, new background, or new camera angle. Follow the uploaded image closely and apply only the corrections below. Generate a photorealistic image of the same young adult female-presenting subject with an oval-heart face structure, narrow tapered chin, soft 118-degree jawline angle, high cheekbone plane, pale ivory skin base with warm peach-beige undertone, large almond eyes occupying roughly one-fifth of face width each, low-to-medium brow distance, short nose-to-lip gap, softly full lips with upper-to-lower lip ratio near 40:60, and a delicate chin length. Use a vertical 9:16 portrait composition. The subject is seated slightly angled toward the viewer’s right, torso cropped from upper thighs to head, shoulders relaxed, and the head bent only slightly downward toward the subject’s right side, which appears as the viewer’s left. The downward tilt must be subtle, gentle, and minimal — not a deep bow, not a strong nod, and not overly lowered. The face remains turned toward the camera with direct eye contact. Long hair falls over the viewer’s left side of the chest, while a few loose strands fall softly across the face. Keep everything close to the original uploaded image. Preserve the same facial identity, face shape, skin tone, eye shape, hair color, hairstyle, brown knitted sweater and overall look from the uploaded image. Expression muscle map: frontalis relaxed, corrugator inactive, orbicularis oculi softly open with mild lower-lid tension, orbicularis oris gently relaxed with lips slightly parted, mentalis inactive, neck elongated with only a slight downward tilt toward the subject’s right side. Render this as a calm relaxed neutral expression with soft slightly parted lips. Direct eye contact toward the camera. Keep the same oversized warm brown cable-knit sweater, hue angle around 28–32°, medium saturation, medium-low brightness in shadow and warm golden highlights on raised knit ridges. The sweater has thick braided cable patterns along both sleeves and front panel, matte wool surface, visible chunky weave, loose neckline sitting wide around the collarbones, relaxed dropped shoulders, long sleeves gathered naturally around the forearms, no logo, no readable text. Keep the same small gold heart-shaped earring on the subject’s left ear, which appears on the viewer’s right side. That ear must not be fully hidden by hair: it should remain partially visible, with a few light strands crossing over and around it. Keep the same small gold necklace with a circular pendant detail at the base of the neck. Keep the same dark blue denim visible only at the lower left edge. No foreground table, no surface objects, no handheld objects, no extra accessories. Skin detail must stay natural: fine pores visible on nose bridge, inner cheeks, and chin; smoother but not plastic texture on forehead and outer cheeks; soft moisture sheen on nose tip, cheekbone tops, lower lip, and inner eyelid area; faint peach-pink variation on cheeks; slightly warmer peach tone around nose and lips; gentle shadow under lower lip, under jaw, and on the viewer’s right side of neck. No heavy beauty filter, no waxy skin, no over-smoothing. Eyes must match the uploaded image: large almond shape, slightly lifted outer corners, iris hue around 70–85° muted hazel-brown with subtle olive flecks, dark limbal ring, medium pupil size, upper eyelids softly hooded, lower lids clean and delicate, gaze aimed directly into lens, small soft catchlights in the upper iris area, fine upper lashes separated and curved, lower lashes minimal. Brows must be warm dark brown, softly arched, medium thickness, feathered texture, positioned close enough to the eyes to keep the same delicate expression. Hair must match the uploaded image: long chestnut brown hair, hue angle around 24–30° with copper-gold undertone, semi-matte silky fiber finish, dense hairline with natural fine baby hairs, side part, broad face-framing sections, thick wave mass falling over the viewer’s left shoulder to the chest, clump width varying from 2–12 mm, soft loose waves, high volume around crown and left side, individual flyaways visible. Some fine strands must fall over the face, especially near the cheek and temple area. The subject’s left ear, seen on the viewer’s right, must remain partially visible through light hair overlap rather than being fully covered. Specular highlights should appear as soft warm streaks on the crown and outer hair contours. The background should follow the uploaded image: an outdoor natural depth stack with 4 layers. Layer 1: softly blurred pale water or sea-like surface near the portrait at the lower-left and lower background area, low-detail, reflective, hue angle 45–60°, high brightness. Layer 2: a muted soft-focus transition band behind the subject, blending pale gray-beige and green-brown tones. Layer 3: a blurred natural background mass in green-olive and neutral brown tones. Layer 4: the upper background is softly bright and blurred, with no hard light source, no clear sun disc, and no distinct objects, only diffused luminous haze. Background brightness remains soft and atmospheric, with the top area gently glowing and the waterside/ocean-like zone near the portrait staying out of focus. No background people. No readable text. The background must remain soft and out of focus with no clear facial details and no readable text. Environment: calm outdoor waterside or seaside-like setting present; blurred water visible near the portrait; dry air, no rain, no fog, no snow, no smoke, no dust particles, no visible lens flare streaks. No hard artificial lighting. The scene should feel naturally lit with soft atmospheric blur only. Use the same lighting: soft warm natural light from above-left and slightly behind the subject, around 10 to 11 o’clock, elevated roughly 35–45 degrees, with gentle frontal fill. Key Kelvin around 4300–4700K, fill around 5600–6200K at roughly 30–40% strength. Highlight zones: upper hair surface, crown flyaways, cheekbone tops, nose bridge, lower lip, necklace, and sweater knit ridges. Shadow terminator falls softly along the viewer’s right cheek edge, under chin, under hair mass, and inside sweater folds. Lighting pattern: soft natural back-side daylight with frontal fill, no harsh flash, no visible direct top light source, no separate artificial rim light. Use a full-frame portrait camera look, approximately 85mm focal length, f/1.6–f/2.0 aperture, shallow depth of field, focus locked on both eyes and upper face, smooth background compression, vertical 9:16 aspect ratio, grain level 2/10, retouching level 4/10, realistic skin detail retained, high dynamic range controlled highlights, soft filmic warm color grade. Overall color grade: golden beige highlights, muted olive-neutral shadows, skin lit hue 30–36° with medium saturation and high brightness, skin shadow hue 24–30° with lower brightness, sweater hue 28–32°, hair highlights hue 32–38°, background greens hue 95–125° desaturated, pale water tones at hue 45–60° with low saturation and high brightness. Split toning: shadows slightly olive-neutral, highlights warm golden-peach. Overall Kelvin feel around 5000K with warm daylight bias. Render at maximum photorealistic quality. Follow the uploaded image as the primary reference. Preserve exact facial proportions, pose, outfit, lighting, color temperature, environment, accessories, and portrait framing. Do not change her identity. Do not make her look like a different person. Do not change the warm brown sweater color. Do not change the outdoor blurred waterside setting. No extra people. No extra objects. No text. No watermark. No CGI look. No plastic skin. No anatomical errors. No beauty filter. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail on subject. Natural skin texture. Photorealistic only.
Use the uploaded image as the main visual reference. Recreate the same young adult male, same indoor mirror-selfie doorway setting, same fitted deep burgundy short-sleeve compression T-shirt, same black loose athletic shorts, same olive-green smartphone, same silver pendant necklace, same upper-body vertical portrait framing, and same clean indoor lighting atmosphere. Do not invent a new face, new outfit, new background, or new camera angle. Follow the uploaded image closely and apply only the corrections below. Generate a photorealistic image of the same young adult man, approximately early-to-mid 20s, athletic muscular build, light warm beige skin with muted peach-olive undertone, sharp oval-V face structure, narrow lower face, defined jawline, slim straight nose, soft medium lips, long neck, lean muscular shoulders, visible vascular forearms, and compact waist in a vertical 9:16 mirror-selfie composition. He is standing centered in front of a bathroom or dressing-room mirror, torso facing forward, head slightly tilted downward and subtly toward his left side, looking stylishly down toward the phone screen. His right arm hangs downward beside the body with the hand clenched loosely near the shorts; his left arm is raised in front of the chest holding the phone vertically, partially covering the lower center-right of the face. Keep everything close to the original uploaded image. Preserve the same facial identity, face shape, skin tone, eye area proportion, hair color, hairstyle, deep burgundy fitted shirt, black shorts, and overall look from the uploaded image. Keep a calm relaxed closed-mouth expression, with soft orbicularis oris tension, relaxed jaw, no smile, relaxed brow area mostly hidden under hair, and neck slightly elongated by the downward head angle. Do not force direct eye contact; keep the gaze naturally directed toward the phone screen as in the original mirror selfie. Keep the same fitted deep burgundy compression T-shirt with smooth synthetic athletic fabric, slight satin-matte surface, tight stretch across the chest and shoulders, visible horizontal tension wrinkles around the lower torso, small fabric folds near the waist, close crew neckline, short fitted sleeves ending around the upper biceps, no logo, no text, and no design print. Keep the same loose black athletic shorts visible from the waist to upper thigh area, soft matte fabric, gathered waistband, relaxed vertical folds, and dark shadowed creases. Keep the same thin silver chain necklace with a small black rectangular pendant hanging at the center of the upper chest. Keep the same small earring on the visible ear. Keep the same olive-green smartphone held vertically in the left hand, triple-camera module visible near the top-left of the phone back, phone covering part of the mouth and lower cheek area. The background should follow the uploaded image exactly: an indoor mirror view with a light beige wooden door open on the left side, silver metal door handle and lock visible at lower-left, pale wood door frame surrounding the subject, light grey-white wall visible behind the subject through the doorway, beige tiled wall on the right side, narrow dark vertical mirror or glass edge at the far right, and warm light wood flooring visible at the lower background. The door must remain in the same place and angle: open toward the viewer on the left, with the vertical door edge running along the left side of frame and the door frame forming a rectangular border behind the subject. The background must remain sharp enough to recognize the door, frame, wall, tiles, handle, and mirror edges, but slightly less detailed than the subject. No clear text, no extra decorations, no extra people, no added objects. Use the same indoor overhead bathroom lighting: soft diffused key light from above-front around 12 o’clock, slightly right-biased, approximately 4300–4700K neutral-warm white, creating highlights on the upper hair strands, forehead area partly hidden by hair, nose bridge, cheek plane, collarbone, shirt chest stretch, shoulders, biceps, and forearm veins. Shadows fall softly under the hair fringe, under the phone, under the jawline, below the pectoral line, along the shirt wrinkles, and inside the door-frame recess. Fill light is moderate from the pale walls and mirror, around 45–55%, with no harsh rim light. Depth of field is smartphone-like with most subject detail sharp and background moderately clear. Focus point should be on the face, hair, phone, shirt, and upper body. Render at maximum photorealistic quality. Follow the uploaded image as the primary reference. Preserve exact facial proportions, head tilt, phone position, pose, outfit, lighting, color temperature, indoor doorway background, and vertical portrait framing. Do not change his identity. Do not make him look like a different person. Do not change the deep burgundy shirt color. Do not change the indoor mirror doorway setting. Do not move the door, door frame, handle, tiled wall, or mirror edge. No extra people. No extra objects. No text. No watermark. No CGI look. No plastic skin. No anatomical errors. No beauty filter. No motion blur. No lens distortion. Ultra high resolution. Sharp facial detail on subject. Natural skin texture with subtle pores and realistic shadows. Photorealistic only.